Struct stm32_metapac::syscfg::regs::Cfgr1

#[repr(transparent)]
pub struct Cfgr1(pub u32);

configuration register 1

Tuple Fields

0: u32

Implementations

impl Cfgr1

pub const fn boosten(&self) -> bool

I/O analog switch voltage booster enable Access can be protected by GTZC_TZSC ADC4SEC. Note: Refer to Table�121 for setting.

pub fn set_boosten(&mut self, val: bool)

I/O analog switch voltage booster enable Access can be protected by GTZC_TZSC ADC4SEC. Note: Refer to Table�121 for setting.

pub const fn anaswvdd(&self) -> bool

GPIO analog switch control voltage selection Access can be protected by GTZC_TZSC ADC4SEC. Note: Refer to Table�121 for setting.

pub fn set_anaswvdd(&mut self, val: bool)

GPIO analog switch control voltage selection Access can be protected by GTZC_TZSC ADC4SEC. Note: Refer to Table�121 for setting.

pub const fn pa6_fmp(&self) -> bool

Fast-mode Plus drive capability activation on PA6 This bit can be read and written only with secure access if PA6 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA6 when PA6 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC6.

pub fn set_pa6_fmp(&mut self, val: bool)

Fast-mode Plus drive capability activation on PA6 This bit can be read and written only with secure access if PA6 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA6 when PA6 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC6.

pub const fn pa7_fmp(&self) -> bool

Fast-mode Plus drive capability activation on PA7 This bit can be read and written only with secure access if PA7 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA7 when PA7 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC7.

pub fn set_pa7_fmp(&mut self, val: bool)

Fast-mode Plus drive capability activation on PA7 This bit can be read and written only with secure access if PA7 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA7 when PA7 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC7.

pub const fn pa15_fmp(&self) -> bool

Fast-mode Plus drive capability activation on PA15 This bit can be read and written only with secure access if PA15 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA15 when PA15 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC15.

pub fn set_pa15_fmp(&mut self, val: bool)

Fast-mode Plus drive capability activation on PA15 This bit can be read and written only with secure access if PA15 is secure in GPIOA. This bit enables the Fast-mode Plus drive mode for PA15 when PA15 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOA SEC15.

pub const fn pb3_fmp(&self) -> bool

Fast-mode Plus drive capability activation on PB3 This bit can be read and written only with secure access if PB3 is secure in GPIOB. This bit enables the Fast-mode Plus drive mode for PB3 when PB3 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOB SEC3.

pub fn set_pb3_fmp(&mut self, val: bool)

Fast-mode Plus drive capability activation on PB3 This bit can be read and written only with secure access if PB3 is secure in GPIOB. This bit enables the Fast-mode Plus drive mode for PB3 when PB3 is not used by I2C peripheral. This can be used to dive a LED for instance. Access can be protected by GPIOB SEC3.

Trait Implementations

impl Clone for Cfgr1

fn clone(&self) -> Cfgr1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cfgr1

fn default() -> Cfgr1

Returns the “default value” for a type.

impl PartialEq for Cfgr1

fn eq(&self, other: &Cfgr1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cfgr1

impl Eq for Cfgr1

impl StructuralPartialEq for Cfgr1