Struct stm32_metapac::saes::regs::Sr

#[repr(transparent)]
pub struct Sr(pub u32);

SAES status register.

Tuple Fields

0: u32

Implementations

impl Sr

pub const fn rderr(&self) -> bool

Read error flag This flag indicates the detection of an unexpected read operation from the SAES_DOUTR register (during computation or data input phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected read returns zero.

pub fn set_rderr(&mut self, val: bool)

Read error flag This flag indicates the detection of an unexpected read operation from the SAES_DOUTR register (during computation or data input phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected read returns zero.

pub const fn wrerr(&self) -> bool

Write error This flag indicates the detection of an unexpected write operation to the SAES_DINR register (during computation or data output phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected write is ignored.

pub fn set_wrerr(&mut self, val: bool)

Write error This flag indicates the detection of an unexpected write operation to the SAES_DINR register (during computation or data output phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected write is ignored.

pub const fn busy(&self) -> bool

Busy This flag indicates whether SAES is idle or busy during GCM payload encryption phase: The flag is set upon SAES initialization, upon fetching random number from the RNG, or upon transferring a shared key to a target peripheral. When GCM encryption is selected, the flag must be at zero before selecting the GCM final phase.

pub fn set_busy(&mut self, val: bool)

Busy This flag indicates whether SAES is idle or busy during GCM payload encryption phase: The flag is set upon SAES initialization, upon fetching random number from the RNG, or upon transferring a shared key to a target peripheral. When GCM encryption is selected, the flag must be at zero before selecting the GCM final phase.

pub const fn keyvalid(&self) -> bool

Key Valid flag This bit is set by hardware when the amount of key information defined by KEYSIZE in SAES_CR has been loaded in SAES_KEYx key registers. In normal mode when KEYSEL equals to zero, the application must write the key registers in the correct sequence, otherwise the KEIF flag of the SAES_ISR register is set and KEYVALID stays at zero. When KEYSEL is different from zero the BUSY flag is automatically set by SAES. When key is loaded successfully, the BUSY flag is cleared and KEYVALID set. Upon an error, the KEIF flag of the SAES_ISR register is set, the BUSY flag cleared and KEYVALID kept at zero. When the KEIF flag is set, the application must clear it through the SAES_ICR register, otherwise KEYVALID cannot be set. See the KEIF bit description for more details. For more information on key loading please refer to.

pub fn set_keyvalid(&mut self, val: bool)

Key Valid flag This bit is set by hardware when the amount of key information defined by KEYSIZE in SAES_CR has been loaded in SAES_KEYx key registers. In normal mode when KEYSEL equals to zero, the application must write the key registers in the correct sequence, otherwise the KEIF flag of the SAES_ISR register is set and KEYVALID stays at zero. When KEYSEL is different from zero the BUSY flag is automatically set by SAES. When key is loaded successfully, the BUSY flag is cleared and KEYVALID set. Upon an error, the KEIF flag of the SAES_ISR register is set, the BUSY flag cleared and KEYVALID kept at zero. When the KEIF flag is set, the application must clear it through the SAES_ICR register, otherwise KEYVALID cannot be set. See the KEIF bit description for more details. For more information on key loading please refer to.

Trait Implementations

impl Clone for Sr

fn clone(&self) -> Sr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Sr

fn default() -> Sr

Returns the “default value” for a type.

impl PartialEq for Sr

fn eq(&self, other: &Sr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Sr

impl Eq for Sr

impl StructuralPartialEq for Sr