Struct stm32_metapac::flash::regs::Secsr

#[repr(transparent)]
pub struct Secsr(pub u32);

Expand description

secure status register

Tuple Fields§

§0: u32

Implementations§

§

impl Secsr

pub const fn eop(&self) -> bool

Secure end of operation This bit is set by hardware when one or more memory secure operation (program/erase) has been completed successfully. This bit is set only if the secure end of operation interrupts are enabled (EOPIE = 1 in SECCR1). This bit is cleared by writing�1.

pub fn set_eop(&mut self, val: bool)

Secure end of operation This bit is set by hardware when one or more memory secure operation (program/erase) has been completed successfully. This bit is set only if the secure end of operation interrupts are enabled (EOPIE = 1 in SECCR1). This bit is cleared by writing�1.

pub const fn operr(&self) -> bool

Secure operation error This bit is set by hardware when a memory secure operation (program/erase) completes unsuccessfully. This bit is set only if secure error interrupts are enabled (SECERRIE = 1). This bit is cleared by writing 1.

pub fn set_operr(&mut self, val: bool)

Secure operation error This bit is set by hardware when a memory secure operation (program/erase) completes unsuccessfully. This bit is set only if secure error interrupts are enabled (SECERRIE = 1). This bit is cleared by writing 1.

pub const fn progerr(&self) -> bool

Secure programming error This bit is set by hardware when a secure quad-word address to be programmed contains a value different from all 1 before programming, except if the data to write is all 0. This bit is cleared by writing 1.

pub fn set_progerr(&mut self, val: bool)

Secure programming error This bit is set by hardware when a secure quad-word address to be programmed contains a value different from all 1 before programming, except if the data to write is all 0. This bit is cleared by writing 1.

pub const fn wrperr(&self) -> bool

Secure write protection error This bit is set by hardware when an secure address to be erased/programmed belongs to a write-protected part (by WRP or HDP) of the memory. This bit is cleared by writing 1. Refer to Section�7.3.10: memory errors flags for full conditions of error flag setting.

pub fn set_wrperr(&mut self, val: bool)

Secure write protection error This bit is set by hardware when an secure address to be erased/programmed belongs to a write-protected part (by WRP or HDP) of the memory. This bit is cleared by writing 1. Refer to Section�7.3.10: memory errors flags for full conditions of error flag setting.

pub const fn pgaerr(&self) -> bool

Secure programming alignment error This bit is set by hardware when the first word to be programmed is not aligned with a quad-word address, or the second, third or forth word does not belong to the same quad-word address.This bit is cleared by writing 1.

pub fn set_pgaerr(&mut self, val: bool)

Secure programming alignment error This bit is set by hardware when the first word to be programmed is not aligned with a quad-word address, or the second, third or forth word does not belong to the same quad-word address.This bit is cleared by writing 1.

pub const fn sizerr(&self) -> bool

Secure size error This bit is set by hardware when the size of the access is a byte or half-word during a secure program sequence. Only quad-word programming is allowed by means of successive word accesses.This bit is cleared by writing 1.

pub fn set_sizerr(&mut self, val: bool)

Secure size error This bit is set by hardware when the size of the access is a byte or half-word during a secure program sequence. Only quad-word programming is allowed by means of successive word accesses.This bit is cleared by writing 1.

pub const fn pgserr(&self) -> bool

Secure programming sequence error This bit is set by hardware when programming sequence is not correct. It is cleared by writing 1. Refer to Section�7.3.10: memory errors flags for full conditions of error flag setting.

pub fn set_pgserr(&mut self, val: bool)

Secure programming sequence error This bit is set by hardware when programming sequence is not correct. It is cleared by writing 1. Refer to Section�7.3.10: memory errors flags for full conditions of error flag setting.

pub const fn bsy(&self) -> bool

Secure busy This bit indicates that a memory secure or non-secure operation is in progress. This is set on the beginning of a operation and reset when the operation finishes or when an error occurs.

pub fn set_bsy(&mut self, val: bool)

Secure busy This bit indicates that a memory secure or non-secure operation is in progress. This is set on the beginning of a operation and reset when the operation finishes or when an error occurs.

pub const fn wdw(&self) -> bool

Secure wait data to write This bit indicates that the memory write buffer has been written by a secure or non-secure operation. It is set when the first data is stored in the buffer and cleared when the write is performed in the memory.

pub fn set_wdw(&mut self, val: bool)

Secure wait data to write This bit indicates that the memory write buffer has been written by a secure or non-secure operation. It is set when the first data is stored in the buffer and cleared when the write is performed in the memory.