Struct stm32_metapac::rcc::regs::Ccipr3

#[repr(transparent)]
pub struct Ccipr3(pub u32);

RCC peripherals independent clock configuration register 3

Tuple Fields

0: u32

Implementations

impl Ccipr3

pub const fn lpuart1sel(&self) -> Lpuartsel

LPUART1 kernel clock source selection These bits are used to select the LPUART1 kernel clock source. Access can be secured by GTZC_TZSC LPUART1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The LPUART1 is functional in Stop modes only when the kernel clock is HSI or LSE.

pub fn set_lpuart1sel(&mut self, val: Lpuartsel)

LPUART1 kernel clock source selection These bits are used to select the LPUART1 kernel clock source. Access can be secured by GTZC_TZSC LPUART1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The LPUART1 is functional in Stop modes only when the kernel clock is HSI or LSE.

pub const fn spi3sel(&self) -> Spi3sel

SPI3 kernel clock source selection These bits are used to select the SPI3 kernel clock source. Access can be secured by GTZC_TZSC SPI3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The SPI3 is functional in Stop modes only when the kernel clock is HSI.

pub fn set_spi3sel(&mut self, val: Spi3sel)

SPI3 kernel clock source selection These bits are used to select the SPI3 kernel clock source. Access can be secured by GTZC_TZSC SPI3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The SPI3 is functional in Stop modes only when the kernel clock is HSI.

pub const fn i2c3sel(&self) -> I2c3sel

I2C3 kernel clock source selection These bits are used to select the I2C3 kernel clock source. Access can be secured by GTZC_TZSC I2C3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The I2C3 is functional in Stop modes only when the kernel clock is HSI

pub fn set_i2c3sel(&mut self, val: I2c3sel)

I2C3 kernel clock source selection These bits are used to select the I2C3 kernel clock source. Access can be secured by GTZC_TZSC I2C3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The I2C3 is functional in Stop modes only when the kernel clock is HSI

pub const fn lptim1sel(&self) -> Lptim1sel

LPTIM1 kernel clock source selection These bits are used to select the LPTIM1 kernel clock source. Access can be secured by GTZC_TZSC LPTIM1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The LPTIM1 is functional in Stop modes only when the kernel clock is LSI, LSE, HSI with HSIKERON = 1.

pub fn set_lptim1sel(&mut self, val: Lptim1sel)

LPTIM1 kernel clock source selection These bits are used to select the LPTIM1 kernel clock source. Access can be secured by GTZC_TZSC LPTIM1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Note: The LPTIM1 is functional in Stop modes only when the kernel clock is LSI, LSE, HSI with HSIKERON = 1.

pub const fn adcsel(&self) -> Adcsel

ADC4 kernel clock source selection These bits are used to select the ADC4 kernel clock source. Access can be secured by GTZC_TZSC ADC4SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. others: reserved Note: The ADC4 is functional in Stop modes only when the kernel clock is HSI.

pub fn set_adcsel(&mut self, val: Adcsel)

ADC4 kernel clock source selection These bits are used to select the ADC4 kernel clock source. Access can be secured by GTZC_TZSC ADC4SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. others: reserved Note: The ADC4 is functional in Stop modes only when the kernel clock is HSI.

Trait Implementations

impl Clone for Ccipr3

fn clone(&self) -> Ccipr3

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Ccipr3

fn default() -> Ccipr3

Returns the “default value” for a type.

impl PartialEq for Ccipr3

fn eq(&self, other: &Ccipr3) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ccipr3

impl Eq for Ccipr3

impl StructuralPartialEq for Ccipr3