Struct stm32_metapac::rcc::regs::Cifr

#[repr(transparent)]
pub struct Cifr(pub u32);

RCC clock interrupt flag register

Tuple Fields

0: u32

Implementations

impl Cifr

pub const fn lsi1rdyf(&self) -> bool

LSI1 ready interrupt flag Set by hardware when the LSI1 clock becomes stable and LSI1RDYIE is set. Cleared by software setting the LSI1RDYC bit. Access to the bit can be secured by RCC LSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub fn set_lsi1rdyf(&mut self, val: bool)

LSI1 ready interrupt flag Set by hardware when the LSI1 clock becomes stable and LSI1RDYIE is set. Cleared by software setting the LSI1RDYC bit. Access to the bit can be secured by RCC LSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub const fn lserdyf(&self) -> bool

LSE ready interrupt flag Set by hardware when the LSE clock becomes stable and LSERDYIE is set. Cleared by software setting the LSERDYC bit. Access to the bit can be secured by RCC LSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub fn set_lserdyf(&mut self, val: bool)

LSE ready interrupt flag Set by hardware when the LSE clock becomes stable and LSERDYIE is set. Cleared by software setting the LSERDYC bit. Access to the bit can be secured by RCC LSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub const fn hsirdyf(&self) -> bool

HSI ready interrupt flag Set by hardware when the HSI clock becomes stable and HSIRDYIE is set in a response to setting the HSION (see CR). When HSION is not set but the HSI oscillator is enabled by the peripheral through a clock request, this bit is not set and no interrupt is generated. Access to the bit can be secured by RCC HSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Cleared by software setting the HSIRDYC bit.

pub fn set_hsirdyf(&mut self, val: bool)

HSI ready interrupt flag Set by hardware when the HSI clock becomes stable and HSIRDYIE is set in a response to setting the HSION (see CR). When HSION is not set but the HSI oscillator is enabled by the peripheral through a clock request, this bit is not set and no interrupt is generated. Access to the bit can be secured by RCC HSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. Cleared by software setting the HSIRDYC bit.

pub const fn hserdyf(&self) -> bool

HSE ready interrupt flag Set by hardware when the HSE clock becomes stable and HSERDYIE is set. Cleared by software setting the HSERDYC bit. Access to the bit can be secured by RCC HSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub fn set_hserdyf(&mut self, val: bool)

HSE ready interrupt flag Set by hardware when the HSE clock becomes stable and HSERDYIE is set. Cleared by software setting the HSERDYC bit. Access to the bit can be secured by RCC HSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub const fn pllrdyf(&self) -> bool

PLL1 ready interrupt flag Set by hardware when the PLL1 locks and PLL1RDYIE is set. Cleared by software setting the PLL1RDYC bit. Access to the bit can be secured by RCC PLL1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub fn set_pllrdyf(&mut self, val: bool)

PLL1 ready interrupt flag Set by hardware when the PLL1 locks and PLL1RDYIE is set. Cleared by software setting the PLL1RDYC bit. Access to the bit can be secured by RCC PLL1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub const fn hsecssf(&self) -> bool

HSE clock security system interrupt flag Set by hardware when a clock security failure is detected in the HSE oscillator. Cleared by software setting the HSECSSC bit. Access to the bit can be secured by RCC HSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

pub fn set_hsecssf(&mut self, val: bool)

HSE clock security system interrupt flag Set by hardware when a clock security failure is detected in the HSE oscillator. Cleared by software setting the HSECSSC bit. Access to the bit can be secured by RCC HSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.

Trait Implementations

impl Clone for Cifr

fn clone(&self) -> Cifr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cifr

fn default() -> Cifr

Returns the “default value” for a type.

impl PartialEq for Cifr

fn eq(&self, other: &Cifr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cifr

impl Eq for Cifr

impl StructuralPartialEq for Cifr