Struct stm32_metapac::pka::regs::Cr

#[repr(transparent)]
pub struct Cr(pub u32);

PKA control register.

Tuple Fields

0: u32

Implementations

impl Cr

pub const fn en(&self) -> bool

PKA enable. When an illegal operation is selected while EN=1 OPERRF bit is set in PKA_SR. See PKA_CR.MODE bitfield for details. When EN=0 PKA RAM can still be accessed by the application.

pub fn set_en(&mut self, val: bool)

PKA enable. When an illegal operation is selected while EN=1 OPERRF bit is set in PKA_SR. See PKA_CR.MODE bitfield for details. When EN=0 PKA RAM can still be accessed by the application.

pub const fn start(&self) -> bool

start the operation Writing 1 to this bit starts the operation which is selected by MODE[5:0], using the operands and data already written to the PKA RAM. This bit is always read as 0. When an illegal operation is selected while START bit is set no operation is started, and OPERRF bit is set in PKA_SR. START is ignored if PKA is busy.

pub fn set_start(&mut self, val: bool)

start the operation Writing 1 to this bit starts the operation which is selected by MODE[5:0], using the operands and data already written to the PKA RAM. This bit is always read as 0. When an illegal operation is selected while START bit is set no operation is started, and OPERRF bit is set in PKA_SR. START is ignored if PKA is busy.

pub const fn mode(&self) -> u8

PKA operation code When an operation not listed here is written by the application with EN bit set, OPERRF bit is set in PKA_SR register, and the write to MODE bitfield is ignored. When PKA is configured in limited mode (LMF = 1 in PKA_SR), writing a MODE different from 0x26 with EN bit to 1 triggers OPERRF bit to be set and write to MODE bit is ignored.

pub fn set_mode(&mut self, val: u8)

PKA operation code When an operation not listed here is written by the application with EN bit set, OPERRF bit is set in PKA_SR register, and the write to MODE bitfield is ignored. When PKA is configured in limited mode (LMF = 1 in PKA_SR), writing a MODE different from 0x26 with EN bit to 1 triggers OPERRF bit to be set and write to MODE bit is ignored.

pub const fn procendie(&self) -> bool

End of operation interrupt enable.

pub fn set_procendie(&mut self, val: bool)

End of operation interrupt enable.

pub const fn ramerrie(&self) -> bool

RAM error interrupt enable.

pub fn set_ramerrie(&mut self, val: bool)

RAM error interrupt enable.

pub const fn addrerrie(&self) -> bool

Address error interrupt enable.

pub fn set_addrerrie(&mut self, val: bool)

Address error interrupt enable.

pub const fn operrie(&self) -> bool

Operation error interrupt enable.

pub fn set_operrie(&mut self, val: bool)

Operation error interrupt enable.

Trait Implementations

impl Clone for Cr

fn clone(&self) -> Cr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cr

fn default() -> Cr

Returns the “default value” for a type.

impl PartialEq for Cr

fn eq(&self, other: &Cr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cr

impl Eq for Cr

impl StructuralPartialEq for Cr