rp-pac

Crates

git

Versions

rp2040

Flavors

Module rp_pac::ssi

source ·

Modules§

Structs§

  • DW_apb_ssi has the following features: * APB interface – Allows for easy integration into a DesignWare Synthesizable Components for AMBA 2 implementation. * APB3 and APB4 protocol support. * Scalable APB data bus width – Supports APB data bus widths of 8, 16, and 32 bits. * Serial-master or serial-slave operation – Enables serial communication with serial-master or serial-slave peripheral devices. * Programmable Dual/Quad/Octal SPI support in Master Mode. * Dual Data Rate (DDR) and Read Data Strobe (RDS) Support - Enables the DW_apb_ssi master to perform operations with the device in DDR and RDS modes when working in Dual/Quad/Octal mode of operation. * Data Mask Support - Enables the DW_apb_ssi to selectively update the bytes in the device. This feature is applicable only in enhanced SPI modes. * eXecute-In-Place (XIP) support - Enables the DW_apb_ssi master to behave as a memory mapped I/O and fetches the data from the device based on the APB read request. This feature is applicable only in enhanced SPI modes. * DMA Controller Interface – Enables the DW_apb_ssi to interface to a DMA controller over the bus using a handshaking interface for transfer requests. * Independent masking of interrupts – Master collision, transmit FIFO overflow, transmit FIFO empty, receive FIFO full, receive FIFO underflow, and receive FIFO overflow interrupts can all be masked independently. * Multi-master contention detection – Informs the processor of multiple serial-master accesses on the serial bus. * Bypass of meta-stability flip-flops for synchronous clocks – When the APB clock (pclk) and the DW_apb_ssi serial clock (ssi_clk) are synchronous, meta-stable flip-flops are not used when transferring control signals across these clock domains. * Programmable delay on the sample time of the received serial data bit (rxd); enables programmable control of routing delays resulting in higher serial data-bit rates. * Programmable features: - Serial interface operation – Choice of Motorola SPI, Texas Instruments Synchronous Serial Protocol or National Semiconductor Microwire. - Clock bit-rate – Dynamic control of the serial bit rate of the data transfer; used in only serial-master mode of operation. - Data Item size (4 to 32 bits) – Item size of each data transfer under the control of the programmer. * Configured features: - FIFO depth – 16 words deep. The FIFO width is fixed at 32 bits. - 1 slave select output. - Hardware slave-select – Dedicated hardware slave-select line. - Combined interrupt line - one combined interrupt line from the DW_apb_ssi to the interrupt controller. - Interrupt polarity – active high interrupt lines. - Serial clock polarity – low serial-clock polarity directly after reset. - Serial clock phase – capture on first edge of serial-clock directly after reset.