Struct rp_pac::i2c::regs::IcIntrMask

#[repr(transparent)]
pub struct IcIntrMask(pub u32);

I2C Interrupt Mask Register. These bits mask their corresponding interrupt status bits. This register is active low; a value of 0 masks the interrupt, whereas a value of 1 unmasks the interrupt.

Tuple Fields

0: u32

Implementations

impl IcIntrMask

pub const fn m_rx_under(&self) -> bool

This bit masks the R_RX_UNDER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_rx_under(&mut self, val: bool)

This bit masks the R_RX_UNDER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_rx_over(&self) -> bool

This bit masks the R_RX_OVER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_rx_over(&mut self, val: bool)

This bit masks the R_RX_OVER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_rx_full(&self) -> bool

This bit masks the R_RX_FULL interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_rx_full(&mut self, val: bool)

This bit masks the R_RX_FULL interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_tx_over(&self) -> bool

This bit masks the R_TX_OVER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_tx_over(&mut self, val: bool)

This bit masks the R_TX_OVER interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_tx_empty(&self) -> bool

This bit masks the R_TX_EMPTY interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_tx_empty(&mut self, val: bool)

This bit masks the R_TX_EMPTY interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_rd_req(&self) -> bool

This bit masks the R_RD_REQ interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_rd_req(&mut self, val: bool)

This bit masks the R_RD_REQ interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_tx_abrt(&self) -> bool

This bit masks the R_TX_ABRT interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_tx_abrt(&mut self, val: bool)

This bit masks the R_TX_ABRT interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_rx_done(&self) -> bool

This bit masks the R_RX_DONE interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_rx_done(&mut self, val: bool)

This bit masks the R_RX_DONE interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_activity(&self) -> bool

This bit masks the R_ACTIVITY interrupt in IC_INTR_STAT register. Reset value: 0x0

pub fn set_m_activity(&mut self, val: bool)

This bit masks the R_ACTIVITY interrupt in IC_INTR_STAT register. Reset value: 0x0

pub const fn m_stop_det(&self) -> bool

This bit masks the R_STOP_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

pub fn set_m_stop_det(&mut self, val: bool)

This bit masks the R_STOP_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

pub const fn m_start_det(&self) -> bool

This bit masks the R_START_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

pub fn set_m_start_det(&mut self, val: bool)

This bit masks the R_START_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

pub const fn m_gen_call(&self) -> bool

This bit masks the R_GEN_CALL interrupt in IC_INTR_STAT register. Reset value: 0x1

pub fn set_m_gen_call(&mut self, val: bool)

This bit masks the R_GEN_CALL interrupt in IC_INTR_STAT register. Reset value: 0x1

pub const fn m_restart_det(&self) -> bool

This bit masks the R_RESTART_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

pub fn set_m_restart_det(&mut self, val: bool)

This bit masks the R_RESTART_DET interrupt in IC_INTR_STAT register. Reset value: 0x0

Trait Implementations

impl Clone for IcIntrMask

fn clone(&self) -> IcIntrMask

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for IcIntrMask

fn default() -> IcIntrMask

Returns the “default value” for a type.

impl PartialEq for IcIntrMask

fn eq(&self, other: &IcIntrMask) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for IcIntrMask

impl Eq for IcIntrMask

impl StructuralPartialEq for IcIntrMask