Struct rp_pac::i2c::regs::IcIntrStat

#[repr(transparent)]
pub struct IcIntrStat(pub u32);

I2C Interrupt Status Register Each bit in this register has a corresponding mask bit in the IC_INTR_MASK register. These bits are cleared by reading the matching interrupt clear register. The unmasked raw versions of these bits are available in the IC_RAW_INTR_STAT register.

Tuple Fields

0: u32

Implementations

impl IcIntrStat

pub const fn r_rx_under(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RX_UNDER bit. Reset value: 0x0

pub fn set_r_rx_under(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RX_UNDER bit. Reset value: 0x0

pub const fn r_rx_over(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RX_OVER bit. Reset value: 0x0

pub fn set_r_rx_over(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RX_OVER bit. Reset value: 0x0

pub const fn r_rx_full(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RX_FULL bit. Reset value: 0x0

pub fn set_r_rx_full(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RX_FULL bit. Reset value: 0x0

pub const fn r_tx_over(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_TX_OVER bit. Reset value: 0x0

pub fn set_r_tx_over(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_TX_OVER bit. Reset value: 0x0

pub const fn r_tx_empty(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_TX_EMPTY bit. Reset value: 0x0

pub fn set_r_tx_empty(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_TX_EMPTY bit. Reset value: 0x0

pub const fn r_rd_req(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RD_REQ bit. Reset value: 0x0

pub fn set_r_rd_req(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RD_REQ bit. Reset value: 0x0

pub const fn r_tx_abrt(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_TX_ABRT bit. Reset value: 0x0

pub fn set_r_tx_abrt(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_TX_ABRT bit. Reset value: 0x0

pub const fn r_rx_done(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RX_DONE bit. Reset value: 0x0

pub fn set_r_rx_done(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RX_DONE bit. Reset value: 0x0

pub const fn r_activity(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_ACTIVITY bit. Reset value: 0x0

pub fn set_r_activity(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_ACTIVITY bit. Reset value: 0x0

pub const fn r_stop_det(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_STOP_DET bit. Reset value: 0x0

pub fn set_r_stop_det(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_STOP_DET bit. Reset value: 0x0

pub const fn r_start_det(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_START_DET bit. Reset value: 0x0

pub fn set_r_start_det(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_START_DET bit. Reset value: 0x0

pub const fn r_gen_call(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_GEN_CALL bit. Reset value: 0x0

pub fn set_r_gen_call(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_GEN_CALL bit. Reset value: 0x0

pub const fn r_restart_det(&self) -> bool

See IC_RAW_INTR_STAT for a detailed description of R_RESTART_DET bit. Reset value: 0x0

pub fn set_r_restart_det(&mut self, val: bool)

See IC_RAW_INTR_STAT for a detailed description of R_RESTART_DET bit. Reset value: 0x0

Trait Implementations

impl Clone for IcIntrStat

fn clone(&self) -> IcIntrStat

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for IcIntrStat

fn default() -> IcIntrStat

Returns the “default value” for a type.

impl PartialEq for IcIntrStat

fn eq(&self, other: &IcIntrStat) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for IcIntrStat

impl Eq for IcIntrStat

impl StructuralPartialEq for IcIntrStat