Enum Ch2 

pub enum Ch2 {}

Channel 2 marker type.

Trait Implementations

impl Dma<TIM1, Ch2> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch2> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch2> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch2> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch2> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TimerChannel for Ch2

const CHANNEL: Channel = Channel::Ch2

The runtime channel.

impl TimerComplementaryPin<TIM1, Ch2> for PB0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin.

impl TimerComplementaryPin<TIM1, Ch2> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin.

impl TimerComplementaryPin<TIM1, Ch2> for PE10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin.

impl TimerPin<TIM1, Ch2> for PA9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM1, Ch2> for PE11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM15, Ch2> for PA3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM15, Ch2> for PB15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM2, Ch2> for PA1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM2, Ch2> for PB3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM3, Ch2> for PA7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM3, Ch2> for PB5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM3, Ch2> for PC7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM3, Ch2> for PE4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM4, Ch2> for PB7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl TimerPin<TIM4, Ch2> for PD13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin.

impl QeiChannel for Ch2

impl TriggerSource for Ch2