Struct Adc 

pub struct Adc<'d, T: AnyInstance> { /* private fields */ }

Analog to Digital driver.

Implementations

impl<'d, T: Instance + AnyInstance> Adc<'d, T>

pub fn new_with_config(adc: Peri<'d, T>, config: AdcConfig) -> Self

pub fn new(adc: Peri<'d, T>) -> Self

Create a new ADC driver.

pub fn enable_vrefint(&self) -> VrefInt

Enable reading the voltage reference internal channel.

pub fn enable_temperature(&self) -> Temperature

Enable reading the temperature internal channel.

pub fn enable_vbat(&self) -> Vbat

Enable reading the vbat internal channel.

impl<'d, T: Instance + AnyInstance> Adc<'d, T>

pub fn new_adc4(adc: Peri<'d, T>) -> Self

Create a new ADC driver.

pub fn enable_vrefint_adc4(&self) -> VrefInt

Enable reading the voltage reference internal channel.

pub fn enable_temperature_adc4(&self) -> Temperature

Enable reading the temperature internal channel.

pub fn enable_vbat_adc4(&self) -> Vbat

Enable reading the vbat internal channel.

pub fn enable_vcore_adc4(&self) -> Vcore

Enable reading the vbat internal channel.

pub fn enable_dac_channel_adc4(&self, dac: DacChannel) -> Dac

Enable reading the vbat internal channel.

pub fn set_resolution_adc4(&mut self, resolution: Resolution)

Set the ADC resolution.

pub fn set_averaging_adc4(&mut self, averaging: Averaging)

Set hardware averaging.

impl<'d, T: AnyInstance> Adc<'d, T>

pub fn blocking_read( &mut self, channel: &mut impl AdcChannel<T>, sample_time: T::SampleTime, ) -> u16

Read an ADC pin.

pub async fn read( &mut self, rx_dma: Peri<'_, impl RxDma<T>>, sequence: impl ExactSizeIterator<Item = (&mut AnyAdcChannel<T>, T::SampleTime)>, readings: &mut [u16], )

Read one or multiple ADC regular channels using DMA.

sequence iterator and readings must have the same length.

Example

use embassy_stm32::adc::{Adc, AdcChannel}

let mut adc = Adc::new(p.ADC1);
let mut adc_pin0 = p.PA0.into();
let mut adc_pin1 = p.PA1.into();
let mut measurements = [0u16; 2];

adc.read(
    p.DMA1_CH2.reborrow(),
    [
        (&mut *adc_pin0, SampleTime::CYCLES160_5),
        (&mut *adc_pin1, SampleTime::CYCLES160_5),
    ]
    .into_iter(),
    &mut measurements,
)
.await;
defmt::info!("measurements: {}", measurements);

Note: This is not very efficient as the ADC needs to be reconfigured for each read. Use into_ring_buffered, into_ring_buffered_and_injected