Struct Usbhs1_usbc 

pub struct Usbhs1_usbc { /* private fields */ }

USB

Implementations

impl Usbhs1_usbc

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn id(self) -> Reg<Id, R>

Identification

pub const fn hwgeneral(self) -> Reg<Hwgeneral, R>

Hardware General

pub const fn hwhost(self) -> Reg<Hwhost, R>

Host Hardware Parameters

pub const fn hwdevice(self) -> Reg<Hwdevice, R>

Device Hardware Parameters

pub const fn hwtxbuf(self) -> Reg<Hwtxbuf, R>

TX Buffer Hardware Parameters

pub const fn hwrxbuf(self) -> Reg<Hwrxbuf, R>

RX Buffer Hardware Parameters

pub const fn gptimer0ld(self) -> Reg<Gptimer0ld, RW>

General Purpose Timer #0 Load

pub const fn gptimer0ctrl(self) -> Reg<Gptimer0ctrl, RW>

General Purpose Timer #0 Controller

pub const fn gptimer1ld(self) -> Reg<Gptimer1ld, RW>

General Purpose Timer #1 Load

pub const fn gptimer1ctrl(self) -> Reg<Gptimer1ctrl, RW>

General Purpose Timer #1 Controller

pub const fn sbuscfg(self) -> Reg<Sbuscfg, RW>

System Bus Config

pub const fn caplength(self) -> Reg<Caplength, R>

Capability Registers Length

pub const fn hciversion(self) -> Reg<Hciversion, R>

Host Controller Interface Version

pub const fn hcsparams(self) -> Reg<Hcsparams, R>

Host Controller Structural Parameters

pub const fn hccparams(self) -> Reg<Hccparams, R>

Host Controller Capability Parameters

pub const fn dciversion(self) -> Reg<Dciversion, R>

Device Controller Interface Version

pub const fn dccparams(self) -> Reg<Dccparams, R>

Device Controller Capability Parameters

pub const fn usbcmd(self) -> Reg<Usbcmd, RW>

USB Command

pub const fn usbsts(self) -> Reg<Usbsts, RW>

USB Status

pub const fn usbintr(self) -> Reg<Usbintr, RW>

Interrupt Enable

pub const fn frindex(self) -> Reg<Frindex, RW>

USB Frame Index

pub const fn deviceaddr(self) -> Reg<Deviceaddr, RW>

Device Address

pub const fn periodiclistbase(self) -> Reg<Periodiclistbase, RW>

Frame List Base Address

pub const fn asynclistaddr(self) -> Reg<Asynclistaddr, RW>

Next Asynch. Address

pub const fn endptlistaddr(self) -> Reg<Endptlistaddr, RW>

Endpoint List Address

pub const fn burstsize(self) -> Reg<Burstsize, RW>

Programmable Burst Size

pub const fn txfilltuning(self) -> Reg<Txfilltuning, RW>

TX FIFO Fill Tuning

pub const fn endptnak(self) -> Reg<Endptnak, RW>

Endpoint NAK

pub const fn endptnaken(self) -> Reg<Endptnaken, RW>

Endpoint NAK Enable

pub const fn configflag(self) -> Reg<Configflag, R>

Configure Flag

pub const fn portsc1(self) -> Reg<Portsc1, RW>

Port Status & Control

pub const fn otgsc(self) -> Reg<Otgsc, RW>

On-The-Go Status & Control

pub const fn usbmode(self) -> Reg<Usbmode, RW>

USB Device Mode

pub const fn endptsetupstat(self) -> Reg<Endptsetupstat, RW>

Endpoint Setup Status

pub const fn endptprime(self) -> Reg<Endptprime, RW>

Endpoint Prime

pub const fn endptflush(self) -> Reg<Endptflush, RW>

Endpoint Flush

pub const fn endptstat(self) -> Reg<Endptstat, R>

Endpoint Status

pub const fn endptcomplete(self) -> Reg<Endptcomplete, RW>

Endpoint Complete

pub const fn endptctrl0(self) -> Reg<Endptctrl0, RW>

Endpoint Control 0

pub const fn endptctrl1(self) -> Reg<Endptctrl1, RW>

Endpoint Control 1

pub const fn endptctrl2(self) -> Reg<Endptctrl2, RW>

Endpoint Control 2

pub const fn endptctrl3(self) -> Reg<Endptctrl3, RW>

Endpoint Control 3

pub const fn endptctrl4(self) -> Reg<Endptctrl4, RW>

Endpoint Control 4

pub const fn endptctrl5(self) -> Reg<Endptctrl5, RW>

Endpoint Control 5

pub const fn endptctrl6(self) -> Reg<Endptctrl6, RW>

Endpoint Control 6

pub const fn endptctrl7(self) -> Reg<Endptctrl7, RW>

Endpoint Control 7

Trait Implementations

impl Clone for Usbhs1_usbc

fn clone(&self) -> Usbhs1_usbc

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Usbhs1_usbc

fn eq(&self, other: &Usbhs1_usbc) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Usbhs1_usbc

impl Eq for Usbhs1_usbc

impl Send for Usbhs1_usbc

impl StructuralPartialEq for Usbhs1_usbc

impl Sync for Usbhs1_usbc