Struct I2s 

pub struct I2s { /* private fields */ }

LPC-Next0 I2S interface

Implementations

impl I2s

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn cfg1(self) -> Reg<Cfg1, RW>

Configuration register 1 for the primary channel pair.

pub const fn cfg2(self) -> Reg<Cfg2, RW>

Configuration register 2 for the primary channel pair.

pub const fn stat(self) -> Reg<Stat, RW>

Status register for the primary channel pair.

pub const fn div(self) -> Reg<Div, RW>

Clock divider, used by all channel pairs.

pub const fn secchannel(self, n: usize) -> Secchannel

Array of registers: PCFG1, PCFG2, PSTAT

pub const fn fifocfg(self) -> Reg<Fifocfg, RW>

FIFO configuration and enable register.

pub const fn fifostat(self) -> Reg<Fifostat, RW>

FIFO status register.

pub const fn fifotrig(self) -> Reg<Fifotrig, RW>

FIFO trigger settings for interrupt and DMA request.

pub const fn fifointenset(self) -> Reg<Fifointenset, RW>

FIFO interrupt enable set (enable) and read register.

pub const fn fifointenclr(self) -> Reg<Fifointenclr, RW>

FIFO interrupt enable clear (disable) and read register.

pub const fn fifointstat(self) -> Reg<Fifointstat, R>

FIFO interrupt status register.

pub const fn fifowr(self) -> Reg<Fifowr, W>

FIFO write data.

pub const fn fifowr48h(self) -> Reg<Fifowr48h, W>

FIFO write data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.

pub const fn fiford(self) -> Reg<Fiford, R>

FIFO read data.

pub const fn fiford48h(self) -> Reg<Fiford48h, R>

FIFO read data for upper data bits. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.

pub const fn fifordnopop(self) -> Reg<Fifordnopop, R>

FIFO data read with no FIFO pop.

pub const fn fiford48hnopop(self) -> Reg<Fiford48hnopop, R>

FIFO data read for upper data bits with no FIFO pop. May only be used if the I2S is configured for 2x 24-bit data and not using DMA.

pub const fn fifosize(self) -> Reg<Fifosize, RW>

FIFO size register

pub const fn id(self) -> Reg<Id, R>

I2S Module identification

Trait Implementations

impl Clone for I2s

fn clone(&self) -> I2s

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for I2s

fn eq(&self, other: &I2s) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for I2s

impl Eq for I2s

impl Send for I2s

impl StructuralPartialEq for I2s

impl Sync for I2s