Struct CtrlMask 

#[repr(transparent)]
pub struct CtrlMask(pub u32);

CTRL SCT command mask. Zero construction default ensures only explicitly selected bits are written. Register-map hardware reset values are not command payload defaults. Source conflict: RM 42.8 (text lines 106616-106618) says SCT aliases always read 0, must be write-only, and cannot exist for read-only primaries; RM 42.7.1 maps writable primary aliases as RW and also lists aliases of read-only status registers. Mapped access is retained; no reliable alias readback is inferred.

Tuple Fields

0: u32

Implementations

impl CtrlMask

pub const fn enotg_id_chg_irq(&self) -> bool

OTG ID Change Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enotg_id_chg_irq(&mut self, val: bool)

OTG ID Change Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enhostdiscondetect(&self) -> bool

Host Disconnect Detection Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enhostdiscondetect(&mut self, val: bool)

Host Disconnect Detection Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enirqhostdiscon(&self) -> bool

Enable Interrupt for Host Disconnect. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enirqhostdiscon(&mut self, val: bool)

Enable Interrupt for Host Disconnect. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn hostdiscondetect_irq(&self) -> bool

Host Disconnect Detection Interrupt. Raw encoding: 0b - Connected; 1b - Disconnected.

pub const fn set_hostdiscondetect_irq(&mut self, val: bool)

Host Disconnect Detection Interrupt. Raw encoding: 0b - Connected; 1b - Disconnected.

pub const fn endevplugindetect(&self) -> bool

Enable Nonstandard Resistive Plugged-In Detection. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_endevplugindetect(&mut self, val: bool)

Enable Nonstandard Resistive Plugged-In Detection. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn devplugin_polarity(&self) -> bool

Device Plug-In Polarity. Raw encoding: 0b - Plugged in; 1b - Unplugged.

pub const fn set_devplugin_polarity(&mut self, val: bool)

Device Plug-In Polarity. Raw encoding: 0b - Plugged in; 1b - Unplugged.

pub const fn otg_id_chg_irq(&self) -> bool

OTG ID Change Interrupt. Raw encoding: 0b - No ID change interrupt; 1b - ID change interrupt.

pub const fn set_otg_id_chg_irq(&mut self, val: bool)

OTG ID Change Interrupt. Raw encoding: 0b - No ID change interrupt; 1b - ID change interrupt.

pub const fn enotgiddetect(&self) -> bool

Enable Internal OTG ID Detector. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enotgiddetect(&mut self, val: bool)

Enable Internal OTG ID Detector. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn resumeirqsticky(&self) -> bool

Resume Interrupt Sticky. Raw encoding: 0b - During the resume or reset state signaling period; 1b - Until you write 0 to it.

pub const fn set_resumeirqsticky(&mut self, val: bool)

Resume Interrupt Sticky. Raw encoding: 0b - During the resume or reset state signaling period; 1b - Until you write 0 to it.

pub const fn enirqresumedetect(&self) -> bool

Resume Detection Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enirqresumedetect(&mut self, val: bool)

Resume Detection Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn resume_irq(&self) -> bool

Resume Interrupt. Raw encoding: 0b - No resume interrupt; 1b - Resume interrupt.

pub const fn set_resume_irq(&mut self, val: bool)

Resume Interrupt. Raw encoding: 0b - No resume interrupt; 1b - Resume interrupt.

pub const fn enirqdevplugin(&self) -> bool

Enable Interrupt for Nonstandard Resistive Plugged-In Detection. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enirqdevplugin(&mut self, val: bool)

Enable Interrupt for Nonstandard Resistive Plugged-In Detection. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn devplugin_irq(&self) -> bool

Device Plug-In Interrupt.

pub const fn set_devplugin_irq(&mut self, val: bool)

Device Plug-In Interrupt.

pub const fn data_on_lradc(&self) -> bool

APB Clock Switch Option.

pub const fn set_data_on_lradc(&mut self, val: bool)

APB Clock Switch Option.

pub const fn enutmilevel2(&self) -> bool

UTMI Level 2 Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enutmilevel2(&mut self, val: bool)

UTMI Level 2 Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enutmilevel3(&self) -> bool

UTMI Level 3 Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enutmilevel3(&mut self, val: bool)

UTMI Level 3 Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enirqwakeup(&self) -> bool

Wake-Up Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enirqwakeup(&mut self, val: bool)

Wake-Up Interrupt Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn wakeup_irq(&self) -> bool

Wake-Up Interrupt.

pub const fn set_wakeup_irq(&mut self, val: bool)

Wake-Up Interrupt.

pub const fn autoresume_en(&self) -> bool

Autoresume Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_autoresume_en(&mut self, val: bool)

Autoresume Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enautoclr_clkgate(&self) -> bool

Autoclear Clock Gate Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enautoclr_clkgate(&mut self, val: bool)

Autoclear Clock Gate Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn enautoclr_phy_pwd(&self) -> bool

PHY PWD Autoclear Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn set_enautoclr_phy_pwd(&mut self, val: bool)

PHY PWD Autoclear Enable. Raw encoding: 0b - Disable; 1b - Enable.

pub const fn otg_id_value(&self) -> bool

OTG ID Value. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Host; 1b - Device.

pub const fn set_otg_id_value(&mut self, val: bool)

OTG ID Value. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Host; 1b - Device.

pub const fn utmi_suspendm(&self) -> bool

UTMI Suspend. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Suspended; 1b - Not suspended.

pub const fn set_utmi_suspendm(&mut self, val: bool)

UTMI Suspend. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Suspended; 1b - Not suspended.

pub const fn clkgate(&self) -> bool

UTMI Clock Gate. Raw encoding: 0b - Run clocks; 1b - Gate clocks.

pub const fn set_clkgate(&mut self, val: bool)

UTMI Clock Gate. Raw encoding: 0b - Run clocks; 1b - Gate clocks.

pub const fn sftrst(&self) -> bool

Software Reset. Raw encoding: 0b - Release from reset; 1b - Soft-reset.

pub const fn set_sftrst(&mut self, val: bool)

Software Reset. Raw encoding: 0b - Release from reset; 1b - Soft-reset.

Trait Implementations

impl Clone for CtrlMask

fn clone(&self) -> CtrlMask

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CtrlMask

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CtrlMask

fn default() -> CtrlMask

Returns the “default value” for a type.

impl PartialEq for CtrlMask

fn eq(&self, other: &CtrlMask) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for CtrlMask

impl Eq for CtrlMask

impl StructuralPartialEq for CtrlMask