Struct TrimOverrideEnMask 

#[repr(transparent)]
pub struct TrimOverrideEnMask(pub u32);

TRIM_OVERRIDE_EN SCT command mask. Zero construction default ensures only explicitly selected bits are written. Register-map hardware reset values are not command payload defaults. Source conflict: RM 42.8 (text lines 106616-106618) says SCT aliases always read 0, must be write-only, and cannot exist for read-only primaries; RM 42.7.1 maps writable primary aliases as RW and also lists aliases of read-only status registers. Mapped access is retained; no reliable alias readback is inferred.

Tuple Fields

0: u32

Implementations

impl TrimOverrideEnMask

pub const fn div_sel_override(&self) -> bool

Override Enable for PLL Divider Value. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - PLL_SIC.

pub const fn set_div_sel_override(&mut self, val: bool)

Override Enable for PLL Divider Value. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - PLL_SIC.

pub const fn tx_d_cal_override(&self) -> bool

Override Enable for HS TX Output Current Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_d_cal_override(&mut self, val: bool)

Override Enable for HS TX Output Current Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn tx_cal45dp_override(&self) -> bool

Override Enable for USB_DP Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_cal45dp_override(&mut self, val: bool)

Override Enable for USB_DP Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn tx_cal45dm_override(&self) -> bool

Override Enable for USB_DM Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_cal45dm_override(&mut self, val: bool)

Override Enable for USB_DM Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn pll_ctrl0_div_sel(&self) -> u8

PLL Divider Value Configuration Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_pll_ctrl0_div_sel(&mut self, val: u8)

PLL Divider Value Configuration Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn usbphy_tx_d_cal(&self) -> u8

HS TX Output Current Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field. Raw encoding: 0000b - Maximum current, approximately 19% above nominal; 0111b - Nominal; 1111b - Minimum current, approximately 19% below nominal.

pub const fn set_usbphy_tx_d_cal(&mut self, val: u8)

HS TX Output Current Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field. Raw encoding: 0000b - Maximum current, approximately 19% above nominal; 0111b - Nominal; 1111b - Minimum current, approximately 19% below nominal.

pub const fn usbphy_tx_cal45dp(&self) -> u8

DP Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_usbphy_tx_cal45dp(&mut self, val: u8)

DP Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn usbphy_tx_cal45dn(&self) -> u8

DM Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_usbphy_tx_cal45dn(&mut self, val: u8)

DM Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

Trait Implementations

impl Clone for TrimOverrideEnMask

fn clone(&self) -> TrimOverrideEnMask

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TrimOverrideEnMask

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for TrimOverrideEnMask

fn default() -> TrimOverrideEnMask

Returns the “default value” for a type.

impl PartialEq for TrimOverrideEnMask

fn eq(&self, other: &TrimOverrideEnMask) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for TrimOverrideEnMask

impl Eq for TrimOverrideEnMask

impl StructuralPartialEq for TrimOverrideEnMask