Struct DmaCh0MissFrameCnt 

#[repr(transparent)]
pub struct DmaCh0MissFrameCnt(pub u32);

F70RM Rev. 1 section 51.7.5.18; manual text line 157324.

Tuple Fields

0: u32

Implementations

impl DmaCh0MissFrameCnt

pub const fn mfc(&self) -> u16

Read-only. Dropped Packet Counters. This counter indicates the number of packet counters that are dropped by the DMA either because of bus error or because of programing RPF field in DMA_CH0_Rx_Control register. The counter gets cleared when this register is read. Access restriction applies. Clears on read. Self-set to 1 on internal event.

pub const fn set_mfc(&mut self, val: u16)

Read-only. Dropped Packet Counters. This counter indicates the number of packet counters that are dropped by the DMA either because of bus error or because of programing RPF field in DMA_CH0_Rx_Control register. The counter gets cleared when this register is read. Access restriction applies. Clears on read. Self-set to 1 on internal event.

pub const fn mfco(&self) -> bool

Read-only. Overflow status of the MFC Counter. When this bit is set then the MFC counter does not get incremented further. The bit gets cleared when this register is read. Access restriction applies. Clears on read. Self-set to 1 on internal event. 0b - Miss Frame Counter overflow not occurred 1b - Miss Frame Counter overflow occurred

pub const fn set_mfco(&mut self, val: bool)

Read-only. Overflow status of the MFC Counter. When this bit is set then the MFC counter does not get incremented further. The bit gets cleared when this register is read. Access restriction applies. Clears on read. Self-set to 1 on internal event. 0b - Miss Frame Counter overflow not occurred 1b - Miss Frame Counter overflow occurred

Trait Implementations

impl Clone for DmaCh0MissFrameCnt

fn clone(&self) -> DmaCh0MissFrameCnt

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DmaCh0MissFrameCnt

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for DmaCh0MissFrameCnt

fn default() -> DmaCh0MissFrameCnt

Returns the “default value” for a type.

impl PartialEq for DmaCh0MissFrameCnt

fn eq(&self, other: &DmaCh0MissFrameCnt) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for DmaCh0MissFrameCnt

impl Eq for DmaCh0MissFrameCnt

impl StructuralPartialEq for DmaCh0MissFrameCnt