Struct MacTxTimestampStatusNanoseconds 

#[repr(transparent)]
pub struct MacTxTimestampStatusNanoseconds(pub u32);

F70RM Rev. 1 section 51.7.1.37; manual text line 152988.

Tuple Fields

0: u32

Implementations

impl MacTxTimestampStatusNanoseconds

pub const fn txtsslo(&self) -> u32

Read-only. Transmit Timestamp Status Low. This field contains the 31 bits of the Nanoseconds field of the Transmit packet’s captured timestamp.

pub const fn set_txtsslo(&mut self, val: u32)

Read-only. Transmit Timestamp Status Low. This field contains the 31 bits of the Nanoseconds field of the Transmit packet’s captured timestamp.

pub const fn txtssmis(&self) -> bool

Read-only. Transmit Timestamp Status Missed. When this bit is set, it indicates one of the following: - The timestamp of the current packet is ignored if TXTSSTSM bit of the MAC_Timestamp_Control register is reset - The timestamp of the previous packet is overwritten with timestamp of the current packet if TXTSSTSM bit of the MAC_Timestamp_Control register is set. Access restriction applies. Clears on read. Self-set to 1 on internal event. 0b - Transmit Timestamp Status Missed status not detected 1b - Transmit Timestamp Status Missed status detected

pub const fn set_txtssmis(&mut self, val: bool)

Read-only. Transmit Timestamp Status Missed. When this bit is set, it indicates one of the following: - The timestamp of the current packet is ignored if TXTSSTSM bit of the MAC_Timestamp_Control register is reset - The timestamp of the previous packet is overwritten with timestamp of the current packet if TXTSSTSM bit of the MAC_Timestamp_Control register is set. Access restriction applies. Clears on read. Self-set to 1 on internal event. 0b - Transmit Timestamp Status Missed status not detected 1b - Transmit Timestamp Status Missed status detected

Trait Implementations

impl Clone for MacTxTimestampStatusNanoseconds

fn clone(&self) -> MacTxTimestampStatusNanoseconds

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MacTxTimestampStatusNanoseconds

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MacTxTimestampStatusNanoseconds

fn default() -> MacTxTimestampStatusNanoseconds

Returns the “default value” for a type.

impl PartialEq for MacTxTimestampStatusNanoseconds

fn eq(&self, other: &MacTxTimestampStatusNanoseconds) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for MacTxTimestampStatusNanoseconds

impl Eq for MacTxTimestampStatusNanoseconds

impl StructuralPartialEq for MacTxTimestampStatusNanoseconds