Struct TrimOverrideEn 

#[repr(transparent)]
pub struct TrimOverrideEn(pub u32);

Trim. F70RM 42.7.16 (text line 106288). Known reset mask 0x0000007f, known value 0x7f; bits 31:7 (including factory/external trim values and reserved bits) are unknown. Generated reset_value contains only known bits, not factory trim. Upper trim fields are read-only. Override-control encoding tables specify 0 external/nonvolatile settings, 1 TX/PLL_SIC settings. Several upper-field paragraphs reverse this selection or describe self-selection, conflicting with those tables and the TX/PLL_SIC descriptions; no alternative polarity is guessed.

Tuple Fields

0: u32

Implementations

impl TrimOverrideEn

pub const fn div_sel_override(&self) -> bool

Override Enable for PLL Divider Value. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - PLL_SIC.

pub const fn set_div_sel_override(&mut self, val: bool)

Override Enable for PLL Divider Value. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - PLL_SIC.

pub const fn tx_d_cal_override(&self) -> bool

Override Enable for HS TX Output Current Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_d_cal_override(&mut self, val: bool)

Override Enable for HS TX Output Current Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn tx_cal45dp_override(&self) -> bool

Override Enable for USB_DP Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_cal45dp_override(&mut self, val: bool)

Override Enable for USB_DP Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn tx_cal45dm_override(&self) -> bool

Override Enable for USB_DM Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn set_tx_cal45dm_override(&mut self, val: bool)

Override Enable for USB_DM Series Termination Trim. Raw encoding: 0b - TRIM_OVERRIDE_EN; 1b - TX.

pub const fn pll_ctrl0_div_sel(&self) -> u8

PLL Divider Value Configuration Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_pll_ctrl0_div_sel(&mut self, val: u8)

PLL Divider Value Configuration Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn usbphy_tx_d_cal(&self) -> u8

HS TX Output Current Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field. Raw encoding: 0000b - Maximum current, approximately 19% above nominal; 0111b - Nominal; 1111b - Minimum current, approximately 19% below nominal.

pub const fn set_usbphy_tx_d_cal(&mut self, val: u8)

HS TX Output Current Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field. Raw encoding: 0000b - Maximum current, approximately 19% above nominal; 0111b - Nominal; 1111b - Minimum current, approximately 19% below nominal.

pub const fn usbphy_tx_cal45dp(&self) -> u8

DP Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_usbphy_tx_cal45dp(&mut self, val: u8)

DP Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn usbphy_tx_cal45dn(&self) -> u8

DM Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

pub const fn set_usbphy_tx_cal45dn(&mut self, val: u8)

DM Series Termination Resistance Trim Bits from Outside USBPHY. Read-only status/value; writes do not configure this field.

Trait Implementations

impl Clone for TrimOverrideEn

fn clone(&self) -> TrimOverrideEn

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TrimOverrideEn

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for TrimOverrideEn

fn default() -> TrimOverrideEn

Returns the “default value” for a type.

impl PartialEq for TrimOverrideEn

fn eq(&self, other: &TrimOverrideEn) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for TrimOverrideEn

impl Eq for TrimOverrideEn

impl StructuralPartialEq for TrimOverrideEn