nxp-pac

Crates

git

Versions

mcxa567

Flavors

DmaDebugStatus0

Struct DmaDebugStatus0 

Source
#[repr(transparent)]
pub struct DmaDebugStatus0(pub u32);
Expand description

F70RM Rev. 1 section 51.7.4.5; manual text line 155517.

Tuple Fields§

§0: u32

Implementations§

Source§

impl DmaDebugStatus0

Source

pub const fn axwhsts(&self) -> bool

Read-only. AHB Master Status. When high, this bit indicates that the AHB master FSMs are in the non-idle state. 0b - AXI Master Write Channel or AHB Master Status not detected 1b - AXI Master Write Channel or AHB Master Status detected

Source

pub const fn set_axwhsts(&mut self, val: bool)

Read-only. AHB Master Status. When high, this bit indicates that the AHB master FSMs are in the non-idle state. 0b - AXI Master Write Channel or AHB Master Status not detected 1b - AXI Master Write Channel or AHB Master Status detected

Source

pub const fn rps0(&self) -> u8

Read-only. DMA Channel 0 Receive Process State. This field indicates the Rx DMA FSM state for Channel 0. The MSB of this field always returns 0. This field does not generate an interrupt. 0000b - Stopped (Reset or Stop Receive Command issued) 0001b - Running (Fetching Rx Transfer Descriptor) 0010b - Reserved for future use 0011b - Running (Waiting for Rx packet) 0100b - Suspended (Rx Descriptor Unavailable) 0101b - Running (Closing the Rx Descriptor) 0110b - Timestamp write state 0111b - Running (Transferring the received packet data from the Rx buffer to the system memory)

Source

pub const fn set_rps0(&mut self, val: u8)

Read-only. DMA Channel 0 Receive Process State. This field indicates the Rx DMA FSM state for Channel 0. The MSB of this field always returns 0. This field does not generate an interrupt. 0000b - Stopped (Reset or Stop Receive Command issued) 0001b - Running (Fetching Rx Transfer Descriptor) 0010b - Reserved for future use 0011b - Running (Waiting for Rx packet) 0100b - Suspended (Rx Descriptor Unavailable) 0101b - Running (Closing the Rx Descriptor) 0110b - Timestamp write state 0111b - Running (Transferring the received packet data from the Rx buffer to the system memory)

Source

pub const fn tps0(&self) -> u8

Read-only. DMA Channel 0 Transmit Process State. This field indicates the Tx DMA FSM state for Channel 0. The MSB of this field always returns 0. This field does not generate an interrupt. 0000b - Stopped (Reset or Stop Transmit Command issued) 0001b - Running (Fetching Tx Transfer Descriptor) 0010b - Running (Waiting for status) 0011b - Running (Reading Data from system memory buffer and queuing it to the Tx buffer (Tx FIFO)) 0100b - Timestamp write state 0101b - Reserved for future use 0110b - Suspended (Tx Descriptor Unavailable or Tx Buffer Underflow) 0111b - Running (Closing Tx Descriptor)

Source

pub const fn set_tps0(&mut self, val: u8)

Read-only. DMA Channel 0 Transmit Process State. This field indicates the Tx DMA FSM state for Channel 0. The MSB of this field always returns 0. This field does not generate an interrupt. 0000b - Stopped (Reset or Stop Transmit Command issued) 0001b - Running (Fetching Tx Transfer Descriptor) 0010b - Running (Waiting for status) 0011b - Running (Reading Data from system memory buffer and queuing it to the Tx buffer (Tx FIFO)) 0100b - Timestamp write state 0101b - Reserved for future use 0110b - Suspended (Tx Descriptor Unavailable or Tx Buffer Underflow) 0111b - Running (Closing Tx Descriptor)

Trait Implementations§

Source§

impl Clone for DmaDebugStatus0

Source§

fn clone(&self) -> DmaDebugStatus0

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for DmaDebugStatus0

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for DmaDebugStatus0

Source§

fn default() -> DmaDebugStatus0

Returns the “default value” for a type. Read more
Source§

impl PartialEq for DmaDebugStatus0

Source§

fn eq(&self, other: &DmaDebugStatus0) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Copy for DmaDebugStatus0

Source§

impl Eq for DmaDebugStatus0

Source§

impl StructuralPartialEq for DmaDebugStatus0

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.