Struct MacPps0TargetTimeNanoseconds 

#[repr(transparent)]
pub struct MacPps0TargetTimeNanoseconds(pub u32);

F70RM Rev. 1 section 51.7.1.48; manual text line 153813.

Tuple Fields

0: u32

Implementations

impl MacPps0TargetTimeNanoseconds

pub const fn ttsl0(&self) -> u32

Target Time Low for PPS Register. This register stores the time in (signed) nanoseconds. When the value of the timestamp matches the value in both Target Timestamp registers, the MAC starts or stops the PPS signal output and generates an interrupt (if enabled) based on the TRGTMODSEL0 field (Bits [6:5]) in MAC_PPS_Control. When the TSCTRLSSR bit is reset in the MAC_Timestamp_Control register, this value must be (time in ns / 0.465). The actual start or stop time of the PPS signal output might have an error margin up to one unit of sub-second increment value. When the TSCTRLSSR bit is set in the MAC_Timestamp_Control register, this value must not exceed 0x3B9A_C9FF. The actual start or stop time of the PPS signal output might have an error margin up to one unit of sub-second increment value. Access restriction applies. Setting 1 sets. Self-cleared. Setting 0 has no effect.

pub const fn set_ttsl0(&mut self, val: u32)

Target Time Low for PPS Register. This register stores the time in (signed) nanoseconds. When the value of the timestamp matches the value in both Target Timestamp registers, the MAC starts or stops the PPS signal output and generates an interrupt (if enabled) based on the TRGTMODSEL0 field (Bits [6:5]) in MAC_PPS_Control. When the TSCTRLSSR bit is reset in the MAC_Timestamp_Control register, this value must be (time in ns / 0.465). The actual start or stop time of the PPS signal output might have an error margin up to one unit of sub-second increment value. When the TSCTRLSSR bit is set in the MAC_Timestamp_Control register, this value must not exceed 0x3B9A_C9FF. The actual start or stop time of the PPS signal output might have an error margin up to one unit of sub-second increment value. Access restriction applies. Setting 1 sets. Self-cleared. Setting 0 has no effect.

Trait Implementations

impl Clone for MacPps0TargetTimeNanoseconds

fn clone(&self) -> MacPps0TargetTimeNanoseconds

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MacPps0TargetTimeNanoseconds

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MacPps0TargetTimeNanoseconds

fn default() -> MacPps0TargetTimeNanoseconds

Returns the “default value” for a type.

impl PartialEq for MacPps0TargetTimeNanoseconds

fn eq(&self, other: &MacPps0TargetTimeNanoseconds) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for MacPps0TargetTimeNanoseconds

impl Eq for MacPps0TargetTimeNanoseconds

impl StructuralPartialEq for MacPps0TargetTimeNanoseconds