Struct MacRxFlowCtrl 

#[repr(transparent)]
pub struct MacRxFlowCtrl(pub u32);

F70RM Rev. 1 section 51.7.1.10; manual text line 149719.

Tuple Fields

0: u32

Implementations

impl MacRxFlowCtrl

pub const fn rfe(&self) -> bool

Receive Flow Control Enable. When this bit is set and the MAC is operating in full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in half-duplex mode, the decode function of the Pause packet is disabled. 0b - Receive Flow Control is disabled 1b - Receive Flow Control is enabled

pub const fn set_rfe(&mut self, val: bool)

Receive Flow Control Enable. When this bit is set and the MAC is operating in full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in half-duplex mode, the decode function of the Pause packet is disabled. 0b - Receive Flow Control is disabled 1b - Receive Flow Control is enabled

pub const fn up(&self) -> bool

Unicast Pause Packet Detect. A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address must be as specified in MAC_Address0_High and MAC_Address0_Low. When this bit is reset, the MAC only detects Pause packets with unique multicast address. NOTE The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011. 0b - Unicast Pause Packet Detect disabled 1b - Unicast Pause Packet Detect enabled

pub const fn set_up(&mut self, val: bool)

Unicast Pause Packet Detect. A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address must be as specified in MAC_Address0_High and MAC_Address0_Low. When this bit is reset, the MAC only detects Pause packets with unique multicast address. NOTE The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011. 0b - Unicast Pause Packet Detect disabled 1b - Unicast Pause Packet Detect enabled

Trait Implementations

impl Clone for MacRxFlowCtrl

fn clone(&self) -> MacRxFlowCtrl

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MacRxFlowCtrl

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MacRxFlowCtrl

fn default() -> MacRxFlowCtrl

Returns the “default value” for a type.

impl PartialEq for MacRxFlowCtrl

fn eq(&self, other: &MacRxFlowCtrl) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for MacRxFlowCtrl

impl Eq for MacRxFlowCtrl

impl StructuralPartialEq for MacRxFlowCtrl