#[repr(transparent)]pub struct MtlTxq0Debug(pub u32);Expand description
F70RM Rev. 1 section 51.7.3.4; manual text line 154400.
Tuple Fields§
§0: u32Implementations§
Source§impl MtlTxq0Debug
impl MtlTxq0Debug
Sourcepub const fn txqpaused(&self) -> bool
pub const fn txqpaused(&self) -> bool
Read-only. Transmit Queue in Pause. When this bit is high and the Rx flow control is enabled, it indicates that the Tx Queue is in the Pause condition (in the full-duplex only mode) because of the following: - Reception of the PFC packet for the priorities assigned to the Tx Queue when PFC is enabled - Reception of 802.3x Pause packet when PFC is disabled 0b - Transmit Queue in Pause status is not detected 1b - Transmit Queue in Pause status is detected
Sourcepub const fn set_txqpaused(&mut self, val: bool)
pub const fn set_txqpaused(&mut self, val: bool)
Read-only. Transmit Queue in Pause. When this bit is high and the Rx flow control is enabled, it indicates that the Tx Queue is in the Pause condition (in the full-duplex only mode) because of the following: - Reception of the PFC packet for the priorities assigned to the Tx Queue when PFC is enabled - Reception of 802.3x Pause packet when PFC is disabled 0b - Transmit Queue in Pause status is not detected 1b - Transmit Queue in Pause status is detected
Sourcepub const fn trcsts(&self) -> u8
pub const fn trcsts(&self) -> u8
Read-only. MTL Tx Queue Read Controller Status. This field indicates the state of the Tx Queue Read Controller: 00b - Idle state 01b - Read state (transferring data to the MAC transmitter) 10b - Waiting for pending Tx Status from the MAC transmitter 11b - Flushing the Tx queue because of the Packet Abort request from the MAC
Sourcepub const fn set_trcsts(&mut self, val: u8)
pub const fn set_trcsts(&mut self, val: u8)
Read-only. MTL Tx Queue Read Controller Status. This field indicates the state of the Tx Queue Read Controller: 00b - Idle state 01b - Read state (transferring data to the MAC transmitter) 10b - Waiting for pending Tx Status from the MAC transmitter 11b - Flushing the Tx queue because of the Packet Abort request from the MAC
Sourcepub const fn twcsts(&self) -> bool
pub const fn twcsts(&self) -> bool
Read-only. MTL Tx Queue Write Controller Status. When high, this bit indicates that the MTL Tx Queue Write Controller is active, and it is transferring the data to the Tx Queue. 0b - MTL Tx Queue Write Controller status is not detected 1b - MTL Tx Queue Write Controller status is detected
Sourcepub const fn set_twcsts(&mut self, val: bool)
pub const fn set_twcsts(&mut self, val: bool)
Read-only. MTL Tx Queue Write Controller Status. When high, this bit indicates that the MTL Tx Queue Write Controller is active, and it is transferring the data to the Tx Queue. 0b - MTL Tx Queue Write Controller status is not detected 1b - MTL Tx Queue Write Controller status is detected
Sourcepub const fn txqsts(&self) -> bool
pub const fn txqsts(&self) -> bool
Read-only. MTL Tx Queue Not Empty Status. When this bit is high, it indicates that the MTL Tx Queue is not empty and some data is left for transmission. 0b - MTL Tx Queue Not Empty status is not detected 1b - MTL Tx Queue Not Empty status is detected
Sourcepub const fn set_txqsts(&mut self, val: bool)
pub const fn set_txqsts(&mut self, val: bool)
Read-only. MTL Tx Queue Not Empty Status. When this bit is high, it indicates that the MTL Tx Queue is not empty and some data is left for transmission. 0b - MTL Tx Queue Not Empty status is not detected 1b - MTL Tx Queue Not Empty status is detected
Sourcepub const fn txstsfsts(&self) -> bool
pub const fn txstsfsts(&self) -> bool
Read-only. MTL Tx Status FIFO Full Status. When high, this bit indicates that the MTL Tx Status FIFO is full. Therefore, the MTL cannot accept any more packets for transmission. 0b - MTL Tx Status FIFO Full status is not detected 1b - MTL Tx Status FIFO Full status is detected
Sourcepub const fn set_txstsfsts(&mut self, val: bool)
pub const fn set_txstsfsts(&mut self, val: bool)
Read-only. MTL Tx Status FIFO Full Status. When high, this bit indicates that the MTL Tx Status FIFO is full. Therefore, the MTL cannot accept any more packets for transmission. 0b - MTL Tx Status FIFO Full status is not detected 1b - MTL Tx Status FIFO Full status is detected
Sourcepub const fn ptxq(&self) -> u8
pub const fn ptxq(&self) -> u8
Read-only. Number of Packets in the Transmit Queue. This field indicates the current number of packets in the Tx Queue. When the DTXSTS bit of MTL_Operation_Mode register is set to 1, this field does not reflect the number of packets in the Transmit queue.
Sourcepub const fn set_ptxq(&mut self, val: u8)
pub const fn set_ptxq(&mut self, val: u8)
Read-only. Number of Packets in the Transmit Queue. This field indicates the current number of packets in the Tx Queue. When the DTXSTS bit of MTL_Operation_Mode register is set to 1, this field does not reflect the number of packets in the Transmit queue.
Sourcepub const fn stxstsf(&self) -> u8
pub const fn stxstsf(&self) -> u8
Read-only. Number of Status Words in Tx Status FIFO of Queue. This field indicates the current number of status in the Tx Status FIFO of this queue. When the DTXSTS bit of MTL_Operation_Mode register is set to 1, this field does not reflect the number of status words in Tx Status FIFO.
Sourcepub const fn set_stxstsf(&mut self, val: u8)
pub const fn set_stxstsf(&mut self, val: u8)
Read-only. Number of Status Words in Tx Status FIFO of Queue. This field indicates the current number of status in the Tx Status FIFO of this queue. When the DTXSTS bit of MTL_Operation_Mode register is set to 1, this field does not reflect the number of status words in Tx Status FIFO.
Trait Implementations§
Source§impl Clone for MtlTxq0Debug
impl Clone for MtlTxq0Debug
Source§fn clone(&self) -> MtlTxq0Debug
fn clone(&self) -> MtlTxq0Debug
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read more