Struct Smictrl 

#[repr(transparent)]
pub struct Smictrl(pub u16);

F70RM Rev. 1 section 54.5.1.31; manual text line 172871.

Tuple Fields

0: u16

Implementations

impl Smictrl

pub const fn ta(&self) -> u8

Turn Around. Programmed to 2’b10 to generate a valid SMI Management frame

pub const fn set_ta(&mut self, val: u8)

Turn Around. Programmed to 2’b10 to generate a valid SMI Management frame

pub const fn ra(&self) -> u8

Register Address. Specifies one of 32 registers within the TXC

pub const fn set_ra(&mut self, val: u8)

Register Address. Specifies one of 32 registers within the TXC

pub const fn pa(&self) -> u8

PHY Address. Specifies one of 32 PHY address. This should be 0x01 since TXC PHY address is fixed to 1.

pub const fn set_pa(&mut self, val: u8)

PHY Address. Specifies one of 32 PHY address. This should be 0x01 since TXC PHY address is fixed to 1.

pub const fn op(&self) -> u8

Operation. Specifies operation to be performed 00b - WRITE_COMPERR. Write frame operation but generates C22 compliance error 01b - WRITE. Write frame operation 10b - READ. Read frame operation 11b - READ_COMPERR. Read frame operation but generates C22 compliance error

pub const fn set_op(&mut self, val: u8)

Operation. Specifies operation to be performed 00b - WRITE_COMPERR. Write frame operation but generates C22 compliance error 01b - WRITE. Write frame operation 10b - READ. Read frame operation 11b - READ_COMPERR. Read frame operation but generates C22 compliance error

pub const fn st(&self) -> u8

Start. Start of frame delimiter. This field must be programmed to 2’b01 to generate a clause 22 compliant SMI Management frame

pub const fn set_st(&mut self, val: u8)

Start. Start of frame delimiter. This field must be programmed to 2’b01 to generate a clause 22 compliant SMI Management frame

Trait Implementations

impl Clone for Smictrl

fn clone(&self) -> Smictrl

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Smictrl

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Smictrl

fn default() -> Smictrl

Returns the “default value” for a type.

impl PartialEq for Smictrl

fn eq(&self, other: &Smictrl) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Smictrl

impl Eq for Smictrl

impl StructuralPartialEq for Smictrl