Struct Endptctrl0 

#[repr(transparent)]
pub struct Endptctrl0(pub u32);

Endpoint Control 0. F70RM 44.6.1.40 (text line 116409). Device endpoint 0 only, permanently enabled as control endpoint; RXT, TXT, RXE, TXE are read-only in the diagram. Stall bits clear on setup reception and remain hardware-cleared until setup status is acknowledged (up to 50 clocks delay).

Tuple Fields

0: u32

Implementations

impl Endptctrl0

pub const fn rxs(&self) -> bool

RX Endpoint Stall. Raw encoding: 0b - Endpoint OK; 1b - Endpoint stalled.

pub const fn set_rxs(&mut self, val: bool)

RX Endpoint Stall. Raw encoding: 0b - Endpoint OK; 1b - Endpoint stalled.

pub const fn rxt(&self) -> u8

RX Endpoint Type. Read-only status/value; writes do not configure this field.

pub const fn set_rxt(&mut self, val: u8)

RX Endpoint Type. Read-only status/value; writes do not configure this field.

pub const fn rxe(&self) -> bool

RX Endpoint Enable. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Disables; 1b - Enables.

pub const fn set_rxe(&mut self, val: bool)

RX Endpoint Enable. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Disables; 1b - Enables.

pub const fn txs(&self) -> bool

TX Endpoint Stall. Raw encoding: 0b - Endpoint OK; 1b - Endpoint stalled.

pub const fn set_txs(&mut self, val: bool)

TX Endpoint Stall. Raw encoding: 0b - Endpoint OK; 1b - Endpoint stalled.

pub const fn txt(&self) -> u8

TX Endpoint Type. Read-only status/value; writes do not configure this field.

pub const fn set_txt(&mut self, val: u8)

TX Endpoint Type. Read-only status/value; writes do not configure this field.

pub const fn txe(&self) -> bool

TX Endpoint Enable. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Disables; 1b - Enables.

pub const fn set_txe(&mut self, val: bool)

TX Endpoint Enable. Read-only status/value; writes do not configure this field. Raw encoding: 0b - Disables; 1b - Enables.

Trait Implementations

impl Clone for Endptctrl0

fn clone(&self) -> Endptctrl0

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Endptctrl0

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Endptctrl0

fn default() -> Endptctrl0

Returns the “default value” for a type.

impl PartialEq for Endptctrl0

fn eq(&self, other: &Endptctrl0) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Endptctrl0

impl Eq for Endptctrl0

impl StructuralPartialEq for Endptctrl0