Struct Usbhs1Usbc 

pub struct Usbhs1Usbc { /* private fields */ }

USB.

Implementations

impl Usbhs1Usbc

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn id(self) -> Reg<Id, R>

Identification.

pub const fn hwgeneral(self) -> Reg<Hwgeneral, R>

Hardware General.

pub const fn hwhost(self) -> Reg<Hwhost, R>

Host Hardware Parameters.

pub const fn hwdevice(self) -> Reg<Hwdevice, R>

Device Hardware Parameters.

pub const fn hwtxbuf(self) -> Reg<Hwtxbuf, R>

TX Buffer Hardware Parameters.

pub const fn hwrxbuf(self) -> Reg<Hwrxbuf, R>

RX Buffer Hardware Parameters.

pub const fn gptimer0ld(self) -> Reg<Gptimer0ld, RW>

General Purpose Timer #0 Load.

pub const fn gptimer0ctrl(self) -> Reg<Gptimer0ctrl, RW>

General Purpose Timer #0 Controller.

pub const fn gptimer1ld(self) -> Reg<Gptimer1ld, RW>

General Purpose Timer #1 Load.

pub const fn gptimer1ctrl(self) -> Reg<Gptimer1ctrl, RW>

General Purpose Timer #1 Controller.

pub const fn sbuscfg(self) -> Reg<Sbuscfg, RW>

System Bus Config.

pub const fn caplength(self) -> Reg<Caplength, R>

Capability Registers Length.

pub const fn hciversion(self) -> Reg<Hciversion, R>

Host Controller Interface Version.

pub const fn hcsparams(self) -> Reg<Hcsparams, R>

Host Controller Structural Parameters.

pub const fn hccparams(self) -> Reg<Hccparams, R>

Host Controller Capability Parameters.

pub const fn dciversion(self) -> Reg<Dciversion, R>

Device Controller Interface Version.

pub const fn dccparams(self) -> Reg<Dccparams, R>

Device Controller Capability Parameters.

pub const fn usbcmd(self) -> Reg<Usbcmd, RW>

USB Command.

pub const fn usbsts(self) -> Reg<Usbsts, RW>

USB Status.

pub const fn usbintr(self) -> Reg<Usbintr, RW>

Interrupt Enable.

pub const fn frindex(self) -> Reg<Frindex, RW>

USB Frame Index.

pub const fn deviceaddr(self) -> Reg<Deviceaddr, RW>

Device Address.

pub const fn periodiclistbase(self) -> Reg<Periodiclistbase, RW>

Frame List Base Address.

pub const fn asynclistaddr(self) -> Reg<Asynclistaddr, RW>

Next Asynch. Address.

pub const fn endptlistaddr(self) -> Reg<Endptlistaddr, RW>

Endpoint List Address.

pub const fn burstsize(self) -> Reg<Burstsize, RW>

Programmable Burst Size.

pub const fn txfilltuning(self) -> Reg<Txfilltuning, RW>

TX FIFO Fill Tuning.

pub const fn endptnak(self) -> Reg<Endptnak, RW>

Endpoint NAK.

pub const fn endptnaken(self) -> Reg<Endptnaken, RW>

Endpoint NAK Enable.

pub const fn configflag(self) -> Reg<Configflag, R>

Configure Flag.

pub const fn portsc1(self) -> Reg<Portsc1, RW>

Port Status & Control.

pub const fn otgsc(self) -> Reg<Otgsc, RW>

On-The-Go Status & Control.

pub const fn usbmode(self) -> Reg<Usbmode, RW>

USB Device Mode.

pub const fn endptsetupstat(self) -> Reg<Endptsetupstat, RW>

Endpoint Setup Status.

pub const fn endptprime(self) -> Reg<Endptprime, RW>

Endpoint Prime.

pub const fn endptflush(self) -> Reg<Endptflush, RW>

Endpoint Flush.

pub const fn endptstat(self) -> Reg<Endptstat, R>

Endpoint Status.

pub const fn endptcomplete(self) -> Reg<Endptcomplete, RW>

Endpoint Complete.

pub const fn endptctrl0(self) -> Reg<Endptctrl0, RW>

Endpoint Control 0.

pub const fn endptctrl1(self) -> Reg<Endptctrl1, RW>

Endpoint Control 1.

pub const fn endptctrl2(self) -> Reg<Endptctrl2, RW>

Endpoint Control 2.

pub const fn endptctrl3(self) -> Reg<Endptctrl3, RW>

Endpoint Control 3.

pub const fn endptctrl4(self) -> Reg<Endptctrl4, RW>

Endpoint Control 4.

pub const fn endptctrl5(self) -> Reg<Endptctrl5, RW>

Endpoint Control 5.

pub const fn endptctrl6(self) -> Reg<Endptctrl6, RW>

Endpoint Control 6.

pub const fn endptctrl7(self) -> Reg<Endptctrl7, RW>

Endpoint Control 7.

Trait Implementations

impl Clone for Usbhs1Usbc

fn clone(&self) -> Usbhs1Usbc

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Usbhs1Usbc

fn eq(&self, other: &Usbhs1Usbc) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Usbhs1Usbc

impl Eq for Usbhs1Usbc

impl Send for Usbhs1Usbc

impl StructuralPartialEq for Usbhs1Usbc

impl Sync for Usbhs1Usbc