Struct Ctrl 

#[repr(transparent)]
pub struct Ctrl(pub u32);

ADC_ETC Global Control Register

Tuple Fields

0: u32

Implementations

impl Ctrl

pub const fn trig_enable(&self) -> TrigEnable

TRIG enable register.

pub const fn set_trig_enable(&mut self, val: TrigEnable)

TRIG enable register.

pub const fn ext0_trig_enable(&self) -> Ext0TrigEnable

TSC0 TRIG enable register.

pub const fn set_ext0_trig_enable(&mut self, val: Ext0TrigEnable)

TSC0 TRIG enable register.

pub const fn ext0_trig_priority(&self) -> u8

External TSC0 trigger priority, 7 is highest priority, while 0 is lowest.

pub const fn set_ext0_trig_priority(&mut self, val: u8)

External TSC0 trigger priority, 7 is highest priority, while 0 is lowest.

pub const fn ext1_trig_enable(&self) -> Ext1TrigEnable

TSC1 TRIG enable register.

pub const fn set_ext1_trig_enable(&mut self, val: Ext1TrigEnable)

TSC1 TRIG enable register.

pub const fn ext1_trig_priority(&self) -> u8

External TSC1 trigger priority, 7 is highest priority, while 0 is lowest.

pub const fn set_ext1_trig_priority(&mut self, val: u8)

External TSC1 trigger priority, 7 is highest priority, while 0 is lowest.

pub const fn pre_divider(&self) -> u8

Pre-divider for trig delay and interval

pub const fn set_pre_divider(&mut self, val: u8)

Pre-divider for trig delay and interval

pub const fn dma_mode_sel(&self) -> DmaModeSel

Select the trigger type of the DMA_REQ.

pub const fn set_dma_mode_sel(&mut self, val: DmaModeSel)

Select the trigger type of the DMA_REQ.

pub const fn tsc_bypass(&self) -> TscBypass

TSC Bypass To use ADC2, this bit should be cleared.

pub const fn set_tsc_bypass(&mut self, val: TscBypass)

TSC Bypass To use ADC2, this bit should be cleared.

pub const fn softrst(&self) -> Softrst

Software synchronous reset, active high.

pub const fn set_softrst(&mut self, val: Softrst)

Software synchronous reset, active high.

Trait Implementations

impl Clone for Ctrl

fn clone(&self) -> Ctrl

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Ctrl

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Ctrl

fn default() -> Ctrl

Returns the “default value” for a type.

impl PartialEq for Ctrl

fn eq(&self, other: &Ctrl) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ctrl

impl Eq for Ctrl

impl StructuralPartialEq for Ctrl