Struct SecGpioMask1 

#[repr(transparent)]
pub struct SecGpioMask1(pub u32);

Secure GPIO mask for port 1 pins.

Tuple Fields

0: u32

Implementations

impl SecGpioMask1

pub const fn pio1_pin0_sec_mask(&self) -> bool

0 : Pin PIO1_0 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin0_sec_mask(&mut self, val: bool)

0 : Pin PIO1_0 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin1_sec_mask(&self) -> bool

0 : Pin PIO1_1 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin1_sec_mask(&mut self, val: bool)

0 : Pin PIO1_1 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin2_sec_mask(&self) -> bool

0 : Pin PIO1_2 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin2_sec_mask(&mut self, val: bool)

0 : Pin PIO1_2 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin3_sec_mask(&self) -> bool

0 : Pin PIO1_3 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin3_sec_mask(&mut self, val: bool)

0 : Pin PIO1_3 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin4_sec_mask(&self) -> bool

0 : Pin PIO1_4 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin4_sec_mask(&mut self, val: bool)

0 : Pin PIO1_4 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin5_sec_mask(&self) -> bool

0 : Pin PIO1_5 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin5_sec_mask(&mut self, val: bool)

0 : Pin PIO1_5 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin6_sec_mask(&self) -> bool

0 : Pin PIO1_6 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin6_sec_mask(&mut self, val: bool)

0 : Pin PIO1_6 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin7_sec_mask(&self) -> bool

0 : Pin PIO1_7 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin7_sec_mask(&mut self, val: bool)

0 : Pin PIO1_7 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin8_sec_mask(&self) -> bool

0 : Pin PIO1_8 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin8_sec_mask(&mut self, val: bool)

0 : Pin PIO1_8 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin9_sec_mask(&self) -> bool

0 : Pin PIO1_9 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin9_sec_mask(&mut self, val: bool)

0 : Pin PIO1_9 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin10_sec_mask(&self) -> bool

0 : Pin PIO1_10 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin10_sec_mask(&mut self, val: bool)

0 : Pin PIO1_10 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin11_sec_mask(&self) -> bool

0 : Pin PIO1_11 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin11_sec_mask(&mut self, val: bool)

0 : Pin PIO1_11 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin12_sec_mask(&self) -> bool

0 : Pin PIO1_12 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin12_sec_mask(&mut self, val: bool)

0 : Pin PIO1_12 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin13_sec_mask(&self) -> bool

0 : Pin PIO1_13 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin13_sec_mask(&mut self, val: bool)

0 : Pin PIO1_13 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin14_sec_mask(&self) -> bool

0 : Pin PIO1_14 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin14_sec_mask(&mut self, val: bool)

0 : Pin PIO1_14 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin15_sec_mask(&self) -> bool

0 : Pin PIO1_15 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin15_sec_mask(&mut self, val: bool)

0 : Pin PIO1_15 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin16_sec_mask(&self) -> bool

0 : Pin PIO1_16 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin16_sec_mask(&mut self, val: bool)

0 : Pin PIO1_16 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin17_sec_mask(&self) -> bool

0 : Pin PIO1_17 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin17_sec_mask(&mut self, val: bool)

0 : Pin PIO1_17 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin18_sec_mask(&self) -> bool

0 : Pin PIO1_18 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin18_sec_mask(&mut self, val: bool)

0 : Pin PIO1_18 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin19_sec_mask(&self) -> bool

0 : Pin PIO1_19 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin19_sec_mask(&mut self, val: bool)

0 : Pin PIO1_19 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin20_sec_mask(&self) -> bool

0 : Pin PIO1_20 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin20_sec_mask(&mut self, val: bool)

0 : Pin PIO1_20 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin21_sec_mask(&self) -> bool

0 : Pin PIO1_21 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin21_sec_mask(&mut self, val: bool)

0 : Pin PIO1_21 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin22_sec_mask(&self) -> bool

0 : Pin PIO1_22 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin22_sec_mask(&mut self, val: bool)

0 : Pin PIO1_22 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin23_sec_mask(&self) -> bool

0 : Pin PIO1_23 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin23_sec_mask(&mut self, val: bool)

0 : Pin PIO1_23 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin24_sec_mask(&self) -> bool

0 : Pin PIO1_24 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin24_sec_mask(&mut self, val: bool)

0 : Pin PIO1_24 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin25_sec_mask(&self) -> bool

0 : Pin PIO1_25 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin25_sec_mask(&mut self, val: bool)

0 : Pin PIO1_25 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin26_sec_mask(&self) -> bool

0 : Pin PIO1_26 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin26_sec_mask(&mut self, val: bool)

0 : Pin PIO1_26 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin27_sec_mask(&self) -> bool

0 : Pin PIO1_27 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin27_sec_mask(&mut self, val: bool)

0 : Pin PIO1_27 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin28_sec_mask(&self) -> bool

0 : Pin PIO1_28 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin28_sec_mask(&mut self, val: bool)

0 : Pin PIO1_28 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin29_sec_mask(&self) -> bool

0 : Pin PIO1_29 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin29_sec_mask(&mut self, val: bool)

0 : Pin PIO1_29 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin30_sec_mask(&self) -> bool

0 : Pin PIO1_30 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin30_sec_mask(&mut self, val: bool)

0 : Pin PIO1_30 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn pio1_pin31_sec_mask(&self) -> bool

0 : Pin PIO1_31 state is readable by non-secure world through non-secure GPIO port control registers

pub const fn set_pio1_pin31_sec_mask(&mut self, val: bool)

0 : Pin PIO1_31 state is readable by non-secure world through non-secure GPIO port control registers

Trait Implementations

impl Clone for SecGpioMask1

fn clone(&self) -> SecGpioMask1

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SecGpioMask1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SecGpioMask1

fn default() -> SecGpioMask1

Returns the “default value” for a type.

impl PartialEq for SecGpioMask1

fn eq(&self, other: &SecGpioMask1) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for SecGpioMask1

impl Eq for SecGpioMask1

impl StructuralPartialEq for SecGpioMask1