Struct MtlQ0InterruptControlStatus 

#[repr(transparent)]
pub struct MtlQ0InterruptControlStatus(pub u32);

F70RM Rev. 1 section 51.7.3.5; manual text line 154530.

Tuple Fields

0: u32

Implementations

impl MtlQ0InterruptControlStatus

pub const fn txunfis(&self) -> bool

Transmit Queue Underflow Interrupt Status. This bit indicates that the Transmit Queue had an underflow while transmitting the packet. Transmission is suspended and an Underflow Error TDES3[2] is set. This bit is cleared when the application writes 1 to this bit. Access restriction applies. Self-set to 1 on internal event. Setting 1 clears. Setting 0 has no effect. NOTE This field is not testable by an automated register test. 0b - Transmit Queue Underflow Interrupt Status not detected 1b - Transmit Queue Underflow Interrupt Status detected

pub const fn set_txunfis(&mut self, val: bool)

Transmit Queue Underflow Interrupt Status. This bit indicates that the Transmit Queue had an underflow while transmitting the packet. Transmission is suspended and an Underflow Error TDES3[2] is set. This bit is cleared when the application writes 1 to this bit. Access restriction applies. Self-set to 1 on internal event. Setting 1 clears. Setting 0 has no effect. NOTE This field is not testable by an automated register test. 0b - Transmit Queue Underflow Interrupt Status not detected 1b - Transmit Queue Underflow Interrupt Status detected

pub const fn txuie(&self) -> bool

Transmit Queue Underflow Interrupt Enable. When this bit is set, the Transmit Queue Underflow interrupt is enabled. When this bit is reset, the Transmit Queue Underflow interrupt is disabled. 0b - Transmit Queue Underflow Interrupt Status is disabled 1b - Transmit Queue Underflow Interrupt Status is enabled

pub const fn set_txuie(&mut self, val: bool)

Transmit Queue Underflow Interrupt Enable. When this bit is set, the Transmit Queue Underflow interrupt is enabled. When this bit is reset, the Transmit Queue Underflow interrupt is disabled. 0b - Transmit Queue Underflow Interrupt Status is disabled 1b - Transmit Queue Underflow Interrupt Status is enabled

pub const fn rxovfis(&self) -> bool

Receive Queue Overflow Interrupt Status. This bit indicates that the Receive Queue had an overflow while receiving the packet. If a partial packet is transferred to the application, the overflow status is set in RDES3[21]. This bit is cleared when the application writes 1 to this bit. Access restriction applies. Self-set to 1 on internal event. Setting 1 clears. Setting 0 has no effect. NOTE This field is not testable by an automated register test. 0b - Receive Queue Overflow Interrupt Status not detected 1b - Receive Queue Overflow Interrupt Status detected

pub const fn set_rxovfis(&mut self, val: bool)

Receive Queue Overflow Interrupt Status. This bit indicates that the Receive Queue had an overflow while receiving the packet. If a partial packet is transferred to the application, the overflow status is set in RDES3[21]. This bit is cleared when the application writes 1 to this bit. Access restriction applies. Self-set to 1 on internal event. Setting 1 clears. Setting 0 has no effect. NOTE This field is not testable by an automated register test. 0b - Receive Queue Overflow Interrupt Status not detected 1b - Receive Queue Overflow Interrupt Status detected

pub const fn rxoie(&self) -> bool

Receive Queue Overflow Interrupt Enable. When this bit is set, the Receive Queue Overflow interrupt is enabled. When this bit is reset, the Receive Queue Overflow interrupt is disabled. 0b - Receive Queue Overflow Interrupt is disabled 1b - Receive Queue Overflow Interrupt is enabled

pub const fn set_rxoie(&mut self, val: bool)

Receive Queue Overflow Interrupt Enable. When this bit is set, the Receive Queue Overflow interrupt is enabled. When this bit is reset, the Receive Queue Overflow interrupt is disabled. 0b - Receive Queue Overflow Interrupt is disabled 1b - Receive Queue Overflow Interrupt is enabled

Trait Implementations

impl Clone for MtlQ0InterruptControlStatus

fn clone(&self) -> MtlQ0InterruptControlStatus

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for MtlQ0InterruptControlStatus

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for MtlQ0InterruptControlStatus

fn default() -> MtlQ0InterruptControlStatus

Returns the “default value” for a type.

impl PartialEq for MtlQ0InterruptControlStatus

fn eq(&self, other: &MtlQ0InterruptControlStatus) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for MtlQ0InterruptControlStatus

impl Eq for MtlQ0InterruptControlStatus

impl StructuralPartialEq for MtlQ0InterruptControlStatus