Struct TIM1

pub struct TIM1 { /* private fields */ }

TIM1 peripheral

Implementations

impl TIM1

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdvancedInstance1Channel for TIM1

type CommunicationInterrupt = TIM1_BRK_UP_TRG_COM

Communication interrupt for this timer.

type BreakInputInterrupt = TIM1_BRK_UP_TRG_COM

Break input interrupt for this timer.

impl BreakInput2Pin<TIM1> for PA11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin

impl BreakInput2Pin<TIM1> for PC14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin

impl BreakInputPin<TIM1> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl Ch1Dma<TIM1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch2Dma<TIM1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch2Dma<TIM1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch2Dma<TIM1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch3Dma<TIM1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch3Dma<TIM1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch3Dma<TIM1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Channel1ComplementaryPin<TIM1> for PA3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl Channel1ComplementaryPin<TIM1> for PA7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl Channel1Pin<TIM1> for PA0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel1Pin<TIM1> for PA14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel1Pin<TIM1> for PA5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel1Pin<TIM1> for PA8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel2ComplementaryPin<TIM1> for PA4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin

impl Channel2ComplementaryPin<TIM1> for PA8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin

impl Channel2Pin<TIM1> for PA1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel2Pin<TIM1> for PA9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel2Pin<TIM1> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel3ComplementaryPin<TIM1> for PA5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin

impl Channel3ComplementaryPin<TIM1> for PA8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin

impl Channel3Pin<TIM1> for PA10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel3Pin<TIM1> for PA2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel3Pin<TIM1> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel4Pin<TIM1> for PA11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl Channel4Pin<TIM1> for PA3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl Channel4Pin<TIM1> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl Channel4Pin<TIM1> for PF2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl CoreInstance for TIM1

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.

type UpdateInterrupt = TIM1_BRK_UP_TRG_COM

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl ExternalTriggerPin<TIM1> for PA12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl ExternalTriggerPin<TIM1> for PC14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl ExternalTriggerPin<TIM1> for PC15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl GeneralInstance1Channel for TIM1

type CaptureCompareInterrupt = TIM1_CC

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM1

type TriggerInterrupt = TIM1_BRK_UP_TRG_COM

Trigger event interrupt for this timer.

impl Peripheral for TIM1

type P = TIM1

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl UpDma<TIM1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl AdvancedInstance2Channel for TIM1

impl AdvancedInstance4Channel for TIM1

impl BasicInstance for TIM1

impl BasicNoCr2Instance for TIM1

impl GeneralInstance4Channel for TIM1

impl RccPeripheral for TIM1