Struct ADC2 

pub struct ADC2 { /* private fields */ }

ADC2 peripheral

Implementations

impl ADC2

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PA0>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PA1>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PA2>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PA3>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PB0>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PB1>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PB2>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PC1>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PC2>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PC3>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PC4>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PC5>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PH4>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC2> for Peri<'d, PH5>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl BasicInstance for ADC2

type Regs = Adc

Register block.

impl Clone for ADC2

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for ADC2

impl Debug for ADC2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC2

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for ADC2

type Interrupt = ADC2

Interrupt for this instance.

impl PeripheralType for ADC2

impl RccPeripheral for ADC2

impl RxDma<ADC2> for LPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for LPDMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel