Struct ADC3 

pub struct ADC3 { /* private fields */ }

ADC3 peripheral

Implementations

impl ADC3

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdcChannel<ADC3> for Peri<'_, PA0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PA1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PA2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PA3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PC0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PC1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PC2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PC3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PF10>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PF3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PF4>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PF5>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl BasicInstance for ADC3

type Regs = Adc

impl Clone for ADC3

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ADC3

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC3

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl InjectedTrigger<ADC3> for EXTI15_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM2_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM2_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM3_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM3_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_CH3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM5_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM5_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_CH3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Instance for ADC3

type Interrupt = ADC

impl RegularTrigger<ADC3> for EXTI11_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_CH3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_CH3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM3_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM3_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM4_CH4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM5_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM5_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM5_CH3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM8_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM8_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<ADC3> for DMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for ADC3

impl PeripheralType for ADC3

impl RccPeripheral for ADC3