Struct TIM5

pub struct TIM5 { /* private fields */ }

TIM5 peripheral

Implementations

impl TIM5

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Ch1Dma<TIM5> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch2Dma<TIM5> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch3Dma<TIM5> for DMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM5> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM5> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Channel1Pin<TIM5> for PA0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel1Pin<TIM5> for PH10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel2Pin<TIM5> for PA1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel2Pin<TIM5> for PH11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel3Pin<TIM5> for PA2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel3Pin<TIM5> for PH12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel4Pin<TIM5> for PA3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl Channel4Pin<TIM5> for PI0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl CoreInstance for TIM5

const BITS: TimerBits = TimerBits::Bits32

Amount of bits this timer has.

type UpdateInterrupt = TIM5

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl GeneralInstance1Channel for TIM5

type CaptureCompareInterrupt = TIM5

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM5

type TriggerInterrupt = TIM5

Trigger event interrupt for this timer.

impl Peripheral for TIM5

type P = TIM5

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl UpDma<TIM5> for DMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM5> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl BasicInstance for TIM5

impl BasicNoCr2Instance for TIM5

impl GeneralInstance32bit4Channel for TIM5

impl GeneralInstance4Channel for TIM5

impl RccPeripheral for TIM5