Embassy

Flavors

embassy_stm32::peripherals

Struct USART3

pub struct USART3 { /* private fields */ }

Expand description

USART3 peripheral

Implementations§

impl USART3

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

impl CkPin<USART3> for PA15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CkPin<USART3> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CkPin<USART3> for PB14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CkPin<USART3> for PD2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin

impl CtsPin<USART3> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl CtsPin<USART3> for PB13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl DePin<USART3> for PA15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl DePin<USART3> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl DePin<USART3> for PB14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl DePin<USART3> for PD2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl Instance for USART3

type Interrupt = USART3_4_LPUART1

Interrupt for this peripheral.

impl Peripheral for USART3

type P = USART3

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more

impl RtsPin<USART3> for PA15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RtsPin<USART3> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RtsPin<USART3> for PB14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RtsPin<USART3> for PD2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RxDma<USART3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxPin<USART3> for PB0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART3> for PB11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART3> for PB9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART3> for PC11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART3> for PC5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl RxPin<USART3> for PD9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl TxDma<USART3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxPin<USART3> for PA5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PB10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PB2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PB8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PC10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PC4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl TxPin<USART3> for PD8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl RccPeripheral for USART3

Auto Trait Implementations§

impl Freeze for USART3

impl RefUnwindSafe for USART3

impl Send for USART3

impl Sync for USART3

impl Unpin for USART3

impl UnwindSafe for USART3

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.