Struct USART3 

pub struct USART3 { /* private fields */ }

USART3 peripheral

Implementations

impl USART3

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl CkPin<USART3> for PA15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin.

impl CkPin<USART3> for PB1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin.

impl CkPin<USART3> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin.

impl CkPin<USART3> for PD2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin.

impl Clone for USART3

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CtsPin<USART3> for PA6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin.

impl CtsPin<USART3> for PB13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin.

impl DePin<USART3> for PA15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin.

impl DePin<USART3> for PB1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin.

impl DePin<USART3> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin.

impl DePin<USART3> for PD2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin.

impl Debug for USART3

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for USART3

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for USART3

type Interrupt = USART3_4_5_6_LPUART1

Interrupt for this peripheral.

impl RtsPin<USART3> for PA15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin.

impl RtsPin<USART3> for PB1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin.

impl RtsPin<USART3> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin.

impl RtsPin<USART3> for PD2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin.

impl RxDma<USART3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<USART3> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxPin<USART3> for PB0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin.

impl RxPin<USART3> for PB11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin.

impl RxPin<USART3> for PB9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin.

impl RxPin<USART3> for PC5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin.

impl TxDma<USART3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<USART3> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxPin<USART3> for PA5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin.

impl TxPin<USART3> for PB10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin.

impl TxPin<USART3> for PB2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin.

impl TxPin<USART3> for PB8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin.

impl TxPin<USART3> for PC4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin.

impl Copy for USART3

impl PeripheralType for USART3

impl RccPeripheral for USART3