Embassy
embassy-stm32

Crates

git

Versions

stm32g0c1re

Flavors

embassy_stm32::peripherals

Struct TIM15

Source 
pub struct TIM15 { /* private fields */ }
Expand description

TIM15 peripheral

Implementations§

Source§

impl TIM15

Source

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

Source§

impl AdvancedInstance1Channel for TIM15

Source§

type CommunicationInterrupt = TIM15

Communication interrupt for this timer.
Source§

type BreakInputInterrupt = TIM15

Break input interrupt for this timer.
Source§

impl Ch1Dma<TIM15> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM15> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM15> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Channel1ComplementaryPin<TIM15> for PA1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM15> for PB13

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM15> for PB15

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM15> for PF1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1Pin<TIM15> for PA2

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel1Pin<TIM15> for PB14

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel1Pin<TIM15> for PC1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel2Pin<TIM15> for PA3

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin
Source§

impl Channel2Pin<TIM15> for PB15

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin
Source§

impl Channel2Pin<TIM15> for PC2

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin
Source§

impl CoreInstance for TIM15

Source§

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.
Source§

type UpdateInterrupt = TIM15

Update Interrupt for this timer.
Source§

fn regs() -> *mut ()

Registers for this timer. Read more
Source§

impl GeneralInstance1Channel for TIM15

Source§

type CaptureCompareInterrupt = TIM15

Capture compare interrupt for this timer.
Source§

impl GeneralInstance2Channel for TIM15

Source§

type TriggerInterrupt = TIM15

Trigger event interrupt for this timer.
Source§

impl Peripheral for TIM15

Source§

type P = TIM15

Peripheral singleton type
Source§

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more
Source§

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more
Source§

impl UpDma<TIM15> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM15> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl AdvancedInstance2Channel for TIM15

Source§

impl AdvancedInstance4Channel for TIM15

Source§

impl BasicInstance for TIM15

Source§

impl BasicNoCr2Instance for TIM15

Source§

impl GeneralInstance4Channel for TIM15

Source§

impl RccPeripheral for TIM15

Auto Trait Implementations§

§

impl Freeze for TIM15

§

impl RefUnwindSafe for TIM15

§

impl Send for TIM15

§

impl Sync for TIM15

§

impl Unpin for TIM15

§

impl UnwindSafe for TIM15

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.