Struct ADC1 

pub struct ADC1 { /* private fields */ }

ADC1 peripheral

Implementations

impl ADC1

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdcChannel<ADC1> for (Peri<'_, PA0>, Peri<'_, PA1>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PA1>, Peri<'_, PA2>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PA2>, Peri<'_, PA3>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PA3>, Peri<'_, PB14>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PB0>, Peri<'_, PB11>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PB12>, Peri<'_, PB1>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for (Peri<'_, PF0>, Peri<'_, PB12>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC1> for OpAmpInternalOutput<'d, OPAMP1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC1> for OpAmpOutput<'d, OPAMP1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC1> for OpAmpOutput<'d, OPAMP3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PA0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PA1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PA2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PA3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PB0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PB1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PB11>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PB12>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PB14>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC1> for Peri<'_, PF0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl Clone for ADC1

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ADC1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for ADC1

type Interrupt = ADC1_2

impl RxDma<ADC1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for ADC1

impl PeripheralType for ADC1

impl RccPeripheral for ADC1