Struct ADC3 

pub struct ADC3 { /* private fields */ }

ADC3 peripheral

Implementations

impl ADC3

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdcChannel<ADC3> for (Peri<'_, PB1>, Peri<'_, PE9>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PB13>, Peri<'_, PE8>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PD10>, Peri<'_, PD11>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PE13>, Peri<'_, PE7>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PE7>, Peri<'_, PB13>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PE8>, Peri<'_, PD10>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for (Peri<'_, PE9>, Peri<'_, PE13>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC3> for OpAmpInternalOutput<'d, OPAMP3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC3> for OpAmpInternalOutput<'d, OPAMP6>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC3> for OpAmpOutput<'d, OPAMP3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PB0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PB1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PB13>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PD10>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PD11>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE10>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE11>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE12>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE13>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE7>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE8>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC3> for Peri<'_, PE9>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl BasicInstance for ADC3

type Regs = Adc

impl Clone for ADC3

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ADC3

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC3

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl InjectedTrigger<ADC3> for EXTI3_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG10

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG5

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG6

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG7

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG8

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for HRTIM_ADC_TRG9

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for LPTIMOUT

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM15_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_CC3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_CC4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM1_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM20_CC2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM20_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM20_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM2_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM3_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_CC3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_CC4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM4_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM6_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM7_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_CC2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_CC4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl InjectedTrigger<ADC3> for TIM8_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asInjectedTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Instance for ADC3

type Interrupt = ADC3

impl RegularTrigger<ADC3> for EXTI2_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG10

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG4

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG5

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG6

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG7

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG8

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for HRTIM_ADC_TRG9

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for LPTIMOUT

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM15_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_CC3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM1_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM20_CC1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM20_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM20_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_CC1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_CC3

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM2_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM3_CC1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM3_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM4_CC1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM4_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM6_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM7_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM8_CC1

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM8_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RegularTrigger<ADC3> for TIM8_TRGO2

fn signal(&self) -> u8

Get the signal number needed to use this trigger asRegularTrigger Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<ADC3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for ADC3

impl PeripheralType for ADC3

impl RccPeripheral for ADC3