Struct DAC1

pub struct DAC1 { /* private fields */ }

DAC1 peripheral

Implementations

impl DAC1

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl DacDma1<DAC1> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma1<DAC1> for GPDMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Peripheral for DAC1

type P = DAC1

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl DacPin<DAC1, 2> for PA5

impl Instance for DAC1

impl RccPeripheral for DAC1