Struct GPDMA1_CH3

pub struct GPDMA1_CH3 { /* private fields */ }

GPDMA1_CH3 peripheral

Implementations

impl GPDMA1_CH3

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Channel for GPDMA1_CH3

fn degrade(self) -> AnyChannel

Type-erase (degrade) this pin into an AnyChannel.

impl DacDma1<DAC1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma1 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl DacDma2<DAC1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDacDma2 Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<HASH> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<SAI1, A> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<SAI1, B> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<SAI2, A> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<SAI2, B> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl FrameDma<DCMI> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asFrameDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl From<GPDMA1_CH3> for AnyChannel

fn from(x: GPDMA1_CH3) -> Self

Converts to this type from the input type.

impl Peripheral for GPDMA1_CH3

type P = GPDMA1_CH3

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl ReadDma<CORDIC> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asReadDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<ADC1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<ADC2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<LPUART1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<SPI1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<SPI2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<SPI3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<SPI6> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<UART4> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<UART5> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<UART7> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<UCPD1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<USART6> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<LPUART1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<SPI1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<SPI2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<SPI3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<SPI6> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<UART4> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<UART5> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<UART7> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<UCPD1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<USART6> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl WriteDma<CORDIC> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asWriteDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.