embassy-stm32

Crates

git

Versions

stm32h743vi

Flavors

embassy_stm32::peripherals

Struct USART2

Source
pub struct USART2 { /* private fields */ }
Expand description

USART2 peripheral

Implementations§

Source§

impl USART2

Source

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

Source§

impl CkPin<USART2> for PA4

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin
Source§

impl CkPin<USART2> for PD7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkPin
Source§

impl CtsPin<USART2> for PA0

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin
Source§

impl CtsPin<USART2> for PD3

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin
Source§

impl DePin<USART2> for PA1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin
Source§

impl DePin<USART2> for PD4

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin
Source§

impl Instance for USART2

Source§

type Interrupt = USART2

Interrupt for this peripheral.
Source§

impl Peripheral for USART2

Source§

type P = USART2

Peripheral singleton type
Source§

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more
Source§

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more
Source§

impl RtsPin<USART2> for PA1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin
Source§

impl RtsPin<USART2> for PD4

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin
Source§

impl RxDma<USART2> for DMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<USART2> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxPin<USART2> for PA3

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl RxPin<USART2> for PD6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl TxDma<USART2> for DMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<USART2> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxPin<USART2> for PA2

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl TxPin<USART2> for PD5

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl RccPeripheral for USART2

Auto Trait Implementations§

§

impl Freeze for USART2

§

impl RefUnwindSafe for USART2

§

impl Send for USART2

§

impl Sync for USART2

§

impl Unpin for USART2

§

impl UnwindSafe for USART2

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.