Struct ADC1 

pub struct ADC1 { /* private fields */ }

ADC1 peripheral

Implementations

impl ADC1

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdcChannel<ADC1> for (Peri<'_, PA0>, Peri<'_, PA1>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PA4>, Peri<'_, PA5>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PA6>, Peri<'_, PA7>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PB1>, Peri<'_, PB0>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PC0>, Peri<'_, PC1>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PC1>, Peri<'_, PC2>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PC2>, Peri<'_, PC3>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PC4>, Peri<'_, PC5>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for (Peri<'_, PF11>, Peri<'_, PF12>)

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl<'d> AdcChannel<ADC1> for OpAmpOutput<'d, OPAMP1>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA0>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA1>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA2>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA3>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA4>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA5>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA6>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PA7>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PB0>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PB1>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC0>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC1>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC2>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC3>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC4>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PC5>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PF11>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl AdcChannel<ADC1> for Peri<'_, PF12>

fn degrade_adc<'a>(&'a mut self) -> AnyAdcChannel<'a, T>

impl BasicInstance for ADC1

type Regs = Adc

impl Clone for ADC1

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ADC1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for ADC1

type Interrupt = ADC

impl RxDma<ADC1> for DMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC1> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for ADC1

impl PeripheralType for ADC1

impl RccPeripheral for ADC1