Struct ADC3 

pub struct ADC3 { /* private fields */ }

ADC3 peripheral

Implementations

impl ADC3

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PC0>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PC1>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PC2>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF10>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF3>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF4>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF5>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF6>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF7>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF8>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PF9>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PH2>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PH3>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PH4>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for Peri<'d, PH5>

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PF9>, Peri<'d, PF10>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PF7>, Peri<'d, PF8>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PF5>, Peri<'d, PF6>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PF3>, Peri<'d, PF4>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PC0>, Peri<'d, PC1>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PC1>, Peri<'d, PC2>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PH2>, Peri<'d, PH3>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PH3>, Peri<'d, PH4>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl<'d> AdcChannel<'d, ADC3> for (Peri<'d, PH4>, Peri<'d, PH5>)

fn degrade_adc(self) -> BorrowedAdcChannel<'d, T>

Type-erase the channel. The pin (if any) is configured for the ADC once, here.

fn reborrow_adc<'a>(&'a mut self) -> BorrowedAdcChannel<'a, T>

Borrow the channel, type-erased. The pin (if any) is configured for the ADC.

impl BasicInstance for ADC3

type Regs = Adc

Register block.

impl Clone for ADC3

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for ADC3

impl Debug for ADC3

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC3

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for ADC3

type Interrupt = ADC3

Interrupt for this instance.

impl PeripheralType for ADC3

impl RccPeripheral for ADC3

impl RxDma<ADC3> for DMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC3> for BDMA_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel