Struct ADC2 

pub struct ADC2 { /* private fields */ }

ADC2 peripheral

Implementations

impl ADC2

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdcChannel<ADC2> for (Peri<'_, PA4>, Peri<'_, PA5>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PA6>, Peri<'_, PA7>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PB1>, Peri<'_, PB0>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PC0>, Peri<'_, PC1>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PC1>, Peri<'_, PC2>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PC2>, Peri<'_, PC3>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PC4>, Peri<'_, PC5>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for (Peri<'_, PF13>, Peri<'_, PF14>)

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl<'d> AdcChannel<ADC2> for OpAmpOutput<'d, OPAMP2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA4>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA5>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA6>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PA7>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PB0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PB1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC0>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC1>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC2>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC3>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC4>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PC5>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PF13>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl AdcChannel<ADC2> for Peri<'_, PF14>

fn degrade_adc<'a>(self) -> AnyAdcChannel<'a, T>

where Self: 'a,

impl Clone for ADC2

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ADC2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for ADC2

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for ADC2

type Interrupt = ADC

impl RxDma<ADC2> for DMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<ADC2> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for ADC2

impl PeripheralType for ADC2

impl RccPeripheral for ADC2