Struct XSPI2 

pub struct XSPI2 { /* private fields */ }

XSPI2 peripheral

Implementations

impl XSPI2

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl CLKPin<XSPI2> for PN6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CLKPin

impl Clone for XSPI2

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl D0Pin<XSPI2> for PN2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D0Pin

impl D1Pin<XSPI2> for PN3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D1Pin

impl D2Pin<XSPI2> for PN4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D2Pin

impl D3Pin<XSPI2> for PN5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D3Pin

impl D4Pin<XSPI2> for PN8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D4Pin

impl D5Pin<XSPI2> for PN9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D5Pin

impl D6Pin<XSPI2> for PN10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D6Pin

impl D7Pin<XSPI2> for PN11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D7Pin

impl DQS0Pin<XSPI2> for PN0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DQS0Pin

impl Debug for XSPI2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for XSPI2

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl NCLKPin<XSPI2> for PN7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NCLKPin

impl NCSEither<XSPI2> for PN1

fn sel(&self) -> u8

Get the CSSEL for this NCS pin

impl NCSPin<XSPI2> for PN1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NCSPin

impl XDma<XSPI2> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI2> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for XSPI2

impl Instance for XSPI2

impl PeripheralType for XSPI2

impl RccPeripheral for XSPI2