Struct TIM3 

pub struct TIM3 { /* private fields */ }

TIM3 peripheral

Implementations

impl TIM3

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Clone for TIM3

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CoreInstance for TIM3

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.

type UpdateInterrupt = TIM3

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl Debug for TIM3

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ExternalTriggerPin<TIM3> for PD2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl Format for TIM3

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl GeneralInstance1Channel for TIM3

type CaptureCompareInterrupt = TIM3

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM3

type TriggerInterrupt = TIM3

Trigger event interrupt for this timer.

impl TimerPin<TIM3, Ch1> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch1> for PB4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch1> for PC6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch2> for PA7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch2> for PB5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch2> for PC7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch3> for PB0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch3> for PC8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch4> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch4> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl UpDma<TIM3> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM3> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl BasicInstance for TIM3

impl BasicNoCr2Instance for TIM3

impl Copy for TIM3

impl GeneralInstance4Channel for TIM3

impl PeripheralType for TIM3

impl RccPeripheral for TIM3