Struct XSPI1 

pub struct XSPI1 { /* private fields */ }

XSPI1 peripheral

Implementations

impl XSPI1

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl CLKPin<XSPI1> for PO4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CLKPin

impl Clone for XSPI1

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl D0Pin<XSPI1> for PP0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D0Pin

impl D10Pin<XSPI1> for PP10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D10Pin

impl D11Pin<XSPI1> for PP11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D11Pin

impl D12Pin<XSPI1> for PP12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D12Pin

impl D13Pin<XSPI1> for PP13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D13Pin

impl D14Pin<XSPI1> for PP14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D14Pin

impl D15Pin<XSPI1> for PP15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D15Pin

impl D1Pin<XSPI1> for PP1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D1Pin

impl D2Pin<XSPI1> for PP2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D2Pin

impl D3Pin<XSPI1> for PP3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D3Pin

impl D4Pin<XSPI1> for PP4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D4Pin

impl D5Pin<XSPI1> for PP5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D5Pin

impl D6Pin<XSPI1> for PP6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D6Pin

impl D7Pin<XSPI1> for PP7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D7Pin

impl D8Pin<XSPI1> for PP8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D8Pin

impl D9Pin<XSPI1> for PP9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D9Pin

impl DQS0Pin<XSPI1> for PO2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DQS0Pin

impl DQS1Pin<XSPI1> for PO3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DQS1Pin

impl Debug for XSPI1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for XSPI1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl NCLKPin<XSPI1> for PO5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NCLKPin

impl NCSEither<XSPI1> for PO0

fn sel(&self) -> u8

Get the CSSEL for this NCS pin

impl NCSEither<XSPI1> for PO1

fn sel(&self) -> u8

Get the CSSEL for this NCS pin

impl NCSPin<XSPI1> for PO0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NCSPin

impl NCSPin<XSPI1> for PO1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NCSPin

impl XDma<XSPI1> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl XDma<XSPI1> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asXDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for XSPI1

impl Instance for XSPI1

impl PeripheralType for XSPI1

impl RccPeripheral for XSPI1