Struct TIM8

pub struct TIM8 { /* private fields */ }

TIM8 peripheral

Implementations

impl TIM8

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdvancedInstance1Channel for TIM8

type CommunicationInterrupt = TIM8_TRG_COM

Communication interrupt for this timer.

type BreakInputInterrupt = TIM8_BRK

Break input interrupt for this timer.

impl BreakInputComparator1Pin<TIM8, BkIn1> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator1Pin

impl BreakInputComparator1Pin<TIM8, BkIn2> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator1Pin

impl BreakInputComparator2Pin<TIM8, BkIn1> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator2Pin

impl BreakInputComparator2Pin<TIM8, BkIn2> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator2Pin

impl BreakInputPin<TIM8, BkIn1> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl BreakInputPin<TIM8, BkIn1> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl BreakInputPin<TIM8, BkIn1> for PI4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl BreakInputPin<TIM8, BkIn2> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl BreakInputPin<TIM8, BkIn2> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl Clone for TIM8

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CoreInstance for TIM8

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.

type UpdateInterrupt = TIM8_UP

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl Debug for TIM8

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Dma<TIM8, Ch1> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<TIM8, Ch2> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<TIM8, Ch3> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Dma<TIM8, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl ExternalTriggerPin<TIM8> for PA0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl ExternalTriggerPin<TIM8> for PI3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl Format for TIM8

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl GeneralInstance1Channel for TIM8

type CaptureCompareInterrupt = TIM8_CC

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM8

type TriggerInterrupt = TIM8_TRG_COM

Trigger event interrupt for this timer.

impl TimerComplementaryPin<TIM8, Ch1> for PA5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch1> for PA7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch1> for PH13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch2> for PB0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch2> for PB14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch2> for PH14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch3> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch3> for PB15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerComplementaryPin<TIM8, Ch3> for PH15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerComplementaryPin

impl TimerPin<TIM8, Ch1> for PC6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch1> for PI5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch2> for PC7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch2> for PI6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch3> for PC8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch3> for PI7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch4> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch4> for PI2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl UpDma<TIM8> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl AdvancedInstance2Channel for TIM8

impl AdvancedInstance4Channel for TIM8

impl BasicInstance for TIM8

impl BasicNoCr2Instance for TIM8

impl Copy for TIM8

impl GeneralInstance4Channel for TIM8

impl PeripheralType for TIM8

impl RccPeripheral for TIM8