Struct TIM8

pub struct TIM8 { /* private fields */ }

TIM8 peripheral

Implementations

impl TIM8

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdvancedInstance1Channel for TIM8

type CommunicationInterrupt = TIM8_TRG_COM

Communication interrupt for this timer.

type BreakInputInterrupt = TIM8_BRK

Break input interrupt for this timer.

impl BreakInput2Comparator1Pin<TIM8> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Comparator1Pin

impl BreakInput2Comparator2Pin<TIM8> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Comparator2Pin

impl BreakInput2Pin<TIM8> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin

impl BreakInput2Pin<TIM8> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin

impl BreakInputComparator1Pin<TIM8> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator1Pin

impl BreakInputComparator2Pin<TIM8> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputComparator2Pin

impl BreakInputPin<TIM8> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl BreakInputPin<TIM8> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl Ch1Dma<TIM8> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch2Dma<TIM8> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch3Dma<TIM8> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch4Dma<TIM8> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Channel1ComplementaryPin<TIM8> for PA5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl Channel1ComplementaryPin<TIM8> for PA7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl Channel1Pin<TIM8> for PC6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel2ComplementaryPin<TIM8> for PB0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin

impl Channel2ComplementaryPin<TIM8> for PB14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin

impl Channel2Pin<TIM8> for PC7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin

impl Channel3ComplementaryPin<TIM8> for PB1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin

impl Channel3ComplementaryPin<TIM8> for PB15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin

impl Channel3Pin<TIM8> for PC8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin

impl Channel4Pin<TIM8> for PC9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin

impl CoreInstance for TIM8

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.

type UpdateInterrupt = TIM8_UP

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl ExternalTriggerPin<TIM8> for PA0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin

impl GeneralInstance1Channel for TIM8

type CaptureCompareInterrupt = TIM8_CC

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM8

type TriggerInterrupt = TIM8_TRG_COM

Trigger event interrupt for this timer.

impl Peripheral for TIM8

type P = TIM8

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl UpDma<TIM8> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl AdvancedInstance2Channel for TIM8

impl AdvancedInstance4Channel for TIM8

impl BasicInstance for TIM8

impl BasicNoCr2Instance for TIM8

impl GeneralInstance4Channel for TIM8

impl RccPeripheral for TIM8