Struct DFSDM1 

pub struct DFSDM1 { /* private fields */ }

DFSDM1 peripheral

Implementations

impl DFSDM1

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Ckin0Pin<DFSDM1> for PB2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Ckin0Pin.

impl Ckin1Pin<DFSDM1> for PB13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Ckin1Pin.

impl Ckin2Pin<DFSDM1> for PB15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Ckin2Pin.

impl Ckin3Pin<DFSDM1> for PC6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Ckin3Pin.

impl CkoutPin<DFSDM1> for PB8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkoutPin.

impl CkoutPin<DFSDM1> for PC2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkoutPin.

impl Clone for DFSDM1

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for DFSDM1

impl Datin0Pin<DFSDM1> for PB1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Datin0Pin.

impl Datin1Pin<DFSDM1> for PB12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Datin1Pin.

impl Datin2Pin<DFSDM1> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Datin2Pin.

impl Datin3Pin<DFSDM1> for PC7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Datin3Pin.

impl Debug for DFSDM1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Dma<DFSDM1, Flt0> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt0> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<DFSDM1, Flt1> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl FilterInterrupt<Flt0> for DFSDM1

type Interrupt = DFSDM1_FLT0

Interrupt type for this filter.

fn state() -> &'static State

Filter-interrupt state.

impl FilterInterrupt<Flt1> for DFSDM1

type Interrupt = DFSDM1_FLT1

Interrupt type for this filter.

fn state() -> &'static State

Filter-interrupt state.

impl Format for DFSDM1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for DFSDM1

type Transceivers = Tcv4

Number of transceivers on this instance.

type Filters = Flt2

Number of filters on this instance.

fn instance_state() -> &'static InstanceState

Shared instance-level state.

impl PeripheralType for DFSDM1

impl RccPeripheral for DFSDM1

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM1_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM1_TRGO2

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM8_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM8_TRGO2

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM3_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM4_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM16_OC1

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM6_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for TIM7_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for EXTI11

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for EXTI15

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.

impl<M: FilterMarker> TriggerSource<DFSDM1, M> for LPTIM1_TRGO

fn jextsel(&self) -> u8

JEXTSEL register value for this (instance, filter, source) combination.