Embassy
embassy-stm32

Crates

git

Versions

stm32l552qc

Flavors

embassy_stm32::peripherals

Struct TIM8

Source 
pub struct TIM8 { /* private fields */ }
Expand description

TIM8 peripheral

Implementations§

Source§

impl TIM8

Source

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

Source§

impl AdvancedInstance1Channel for TIM8

Source§

type CommunicationInterrupt = TIM8_TRG_COM

Communication interrupt for this timer.
Source§

type BreakInputInterrupt = TIM8_BRK

Break input interrupt for this timer.
Source§

impl BreakInput2Pin<TIM8> for PB6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin
Source§

impl BreakInput2Pin<TIM8> for PC9

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin
Source§

impl BreakInputPin<TIM8> for PA6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin
Source§

impl BreakInputPin<TIM8> for PB7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin
Source§

impl Ch1Dma<TIM8> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM8> for DMA2_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM8> for DMA2_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM8> for DMA2_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM8> for DMA2_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Channel1ComplementaryPin<TIM8> for PA5

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM8> for PA7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1Pin<TIM8> for PC6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel2ComplementaryPin<TIM8> for PB0

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin
Source§

impl Channel2ComplementaryPin<TIM8> for PB14

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin
Source§

impl Channel2Pin<TIM8> for PC7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin
Source§

impl Channel3ComplementaryPin<TIM8> for PB1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin
Source§

impl Channel3ComplementaryPin<TIM8> for PB15

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin
Source§

impl Channel3Pin<TIM8> for PC8

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin
Source§

impl Channel4Pin<TIM8> for PC9

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin
Source§

impl CoreInstance for TIM8

Source§

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.
Source§

type UpdateInterrupt = TIM8_UP

Update Interrupt for this timer.
Source§

fn regs() -> *mut ()

Registers for this timer. Read more
Source§

impl ExternalTriggerPin<TIM8> for PA0

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin
Source§

impl GeneralInstance1Channel for TIM8

Source§

type CaptureCompareInterrupt = TIM8_CC

Capture compare interrupt for this timer.
Source§

impl GeneralInstance2Channel for TIM8

Source§

type TriggerInterrupt = TIM8_TRG_COM

Trigger event interrupt for this timer.
Source§

impl Peripheral for TIM8

Source§

type P = TIM8

Peripheral singleton type
Source§

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more
Source§

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more
Source§

impl UpDma<TIM8> for DMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl UpDma<TIM8> for DMA2_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl AdvancedInstance2Channel for TIM8

Source§

impl AdvancedInstance4Channel for TIM8

Source§

impl BasicInstance for TIM8

Source§

impl BasicNoCr2Instance for TIM8

Source§

impl GeneralInstance4Channel for TIM8

Source§

impl RccPeripheral for TIM8

Auto Trait Implementations§

§

impl Freeze for TIM8

§

impl RefUnwindSafe for TIM8

§

impl Send for TIM8

§

impl Sync for TIM8

§

impl Unpin for TIM8

§

impl UnwindSafe for TIM8

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.